[cisco-voip] CUBE call hits CUCM but won't route to PSTN

[Erick Wellnitz]

I have something a little off and need some suggestions.

I have three dial peers being matched for outbound.  One is an exact match
and gets selected first.  It points to port 5070.

The other two match +1T and point to port 5060.

Called number matches the destination pattern of the first dial peer, does
it's translation and sends to CM.


364245452| 2013/06/04 10:01:46.979| 002| SdlSig | SIPSetupInd | restart0 |
SIPD(2,100,65,34) | SIPHandler(2,100,63,1) |
(2,100,56,1).1780322-(*:10.2xx.17.xxx) | [R:NP - HP: 0, NP: 0, LP: 0, VLP:
0, LZP: 0 DBP: 0] SignalInfo= SIPInviteSdp CcbId= 1371534 --TransType=1
--TransSecurity=0 PeerAddr = 10.2xx.17.xxx:28157 IdParse= 1 callingNum=
01144######9317 callingName= UK Caller calledNum= 91######4129

My trunk has the proper CSS configured and the proper port in the security
profile.  We receive a 404 Not Found but when using DNA it shows the call
should route. SDL also shows 'no potential matches exist' for 91######4129
when it starts digit analysis.

The CUBE then tries the remaining two dial peers but because the trunk
using port 5060 is set to 4 significant digits we get a 404 Not Found.

Any ideas would be greatly appreciated!



Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130604/8d5f6c19/attachment.html>