[cisco-voip] H.323 DTMF to SIP 2833

Nate VanMaren VanMarenNP at ldschurch.org
Mon Jun 10 15:56:40 EDT 2013



What H.323 DTMF method can I use on a H.323 dial-peer to CUCM that will not invoke an MTP when the outbound side of CUCM is a SIP Trunk that is configured to use 2833.

I am currently using h245-alphanumeric, which seems to be invoking an MTP.

Thanks,
-Nate


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130610/a6cb6f0b/attachment.html>


More information about the cisco-voip mailing list