[cisco-voip] Call goes directly on hold

[Nate VanMaren]

Do you have Lync/MOC RCC enabled?

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Reto Gassmann
Sent: Wednesday, June 12, 2013 4:28 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Call goes directly on hold


hello group

we run a cucm 8.0(3a) and have IP Phones 7960 (Firmware 8.1.200).
Some times we have the problem, that a call goes straight on hold.
User A calls User B. User B picks up the phone and hears the MoH (Call is on hold). User A can put the call out of hold and the call is set up and A and B can talk.

Has any body seen this before?

Thanks
Regards Reto


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130612/a0da1769/attachment.html>