[cisco-voip] Call goes directly on hold

[Reto Gassmann]

Yes we have lync in the backend and moc on the clients.
We Control the phones via rcc CUCM - CUPS - lync.

Am Mittwoch, 12. Juni 2013 schrieb Nate VanMaren :

>  Do you have Lync/MOC RCC enabled?****
>
> ** **
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net<javascript:_e({}, 'cvml', 'cisco-voip-bounces at puck.nether.net');>]
> *On Behalf Of *Reto Gassmann
> *Sent:* Wednesday, June 12, 2013 4:28 AM
> *To:* cisco-voip at puck.nether.net <javascript:_e({}, 'cvml',
> 'cisco-voip at puck.nether.net');>
> *Subject:* [cisco-voip] Call goes directly on hold****
>
> ** **
>
> ** **
>
> hello group****
>
> ** **
>
> we run a cucm 8.0(3a) and have IP Phones 7960 (Firmware 8.1.200).****
>
> Some times we have the problem, that a call goes straight on hold.****
>
> User A calls User B. User B picks up the phone and hears the MoH (Call is
> on hold). User A can put the call out of hold and the call is set up and A
> and B can talk.****
>
> ** **
>
> Has any body seen this before?****
>
> ** **
>
> Thanks ****
>
> Regards Reto ****
>
>
>
> NOTICE: This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged information. Any
> unauthorized review, use, disclosure or distribution is prohibited. If you
> are not the intended recipient, please contact the sender by reply email
> and destroy all copies of the original message.****
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130612/327277d9/attachment.html>