[cisco-voip] Outgoing cLI

[costas georgiou]

Hi All,
 
I have an MGCP and a H323 gateway and I am trying to send out the correct number.  When a call is made it sends out the main number i.e. receptions number rather than the users extension.  CLI is enabled by the provider.  The outbound call Calling party presentation is set to default and so is the Route group. I have even amended that to Allow but still not sending the correct digits.
 
Any ideas?
 
Regards
 
Cos
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130620/6c524110/attachment.html>