[cisco-voip] Call ID

[Marcelo Zilio]

Hi,

I have some SIP gateways and I've notice something different when I issue
the command "show call active voice brief". All the outbound calls have the
same call id, which is 0. Inbound calls are fine.

Please see the sample:

*57B*  : 105481 13:07:01.867 GMT Thu Jun 20 2013.1 +3870 pid:10 Answer
xxxxxx active
 dur 00:31:24 tx:94268/15837024 rx:94271/15083360
 Tele 0/0/2:0 (105481) [0/0/2.23] tx:1885410/1885410/0ms g711ulaw noise:-71
acom:28  i/0:-58/-20 dBm

*57B*  : 105482 13:07:01.867 GMT Thu Jun 20 2013.2 +3870 pid:110 Originate
xxxxxxx active
 dur 00:31:24 tx:94271/15083360 rx:94275/15084000
 IP x.x.x.x:30088 SRTP: off rtt:0ms pl:1880180/60ms lost:0/0/0
delay:55/55/65ms g711ulaw TextRelay: off
 media inactive detected:n media contrl rcvd:n/a timestamp:n/a
 long duration call detected:n long duration call duration:n/a timestamp:n/a

*0*    : 105713 13:15:24.707 GMT Thu Jun 20 2013.1 +11280 pid:30 Answer
xxxxxx active
 dur 00:22:54 tx:69127/11060320 rx:69090/11054400
 IP x.x.x.x:30730 SRTP: off rtt:322ms pl:1380480/250ms lost:3/1/6
delay:55/55/85ms g711ulaw TextRelay: off
 media inactive detected:n media contrl rcvd:n/a timestamp:n/a
 long duration call detected:n long duration call duration:n/a timestamp:n/a

*0*    : 105714 13:15:24.991 GMT Thu Jun 20 2013.1 +11000 pid:1030
Originate xxxxxx active
 dur 00:22:54 tx:69090/11607120 rx:69128/11060480
 Tele 0/0/3:0 (105714) [0/0/3.7] tx:1382550/1382550/0ms g711ulaw noise:-61
acom:51  i/0:-58/-25 dBm

So when I'm troubleshooting some call, is difficult to isolate it because
all calls have the same ID and it is not supposed to be 0 at all.
Anyone know if it's a bug or something misconfigured?
Router is a 3945E, Version 15.1(4)M4.
CUCM 8.6

Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130620/a5269bef/attachment.html>