[cisco-voip] Outgoing cLI

[Adewale2]

okay, thanks
 
Heaven is Real try your best to be there, and in all your getting get understanding
God's Own
Addy


________________________________
 From: Costas Georgiou <ckos1976 at hotmail.com>
To: Ryan Ratliff <rratliff at cisco.com> 
Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net> 
Sent: Tuesday, June 25, 2013 11:42 AM
Subject: Re: [cisco-voip] Outgoing cLI
 


Hi all,

Just to let you know, the issue was with the route patterns, the "use calling parties external number mask" was not ticked.

Thanks for your help.

Regards

Cos

Sent from my iPhone

On 21 Jun 2013, at 15:44, Ryan Ratliff <rratliff at cisco.com> wrote:


In the first two the calling numbers are different, are either of those your main number, or are they the number you expected to be sent?
>
>
>-Ryan 
>
>On Jun 21, 2013, at 5:12 AM, costas georgiou <ckos1976 at hotmail.com> wrote:
>
>The first two debugs are from an MGCP gateway which is only passing the main number not the individual extension.  The last one is passing the correct digits.  They are both outgoing,  all extensions are 7 digits.
> 
>un 21 08:27:26.254: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8  callref = 0x1B5C
>        Sending Complete
>        Bearer Capability i = 0x8090A3
>                Standard = CCITT
>                Transfer Capability = Speech
>                Transfer Mode = Circuit
>                Transfer Rate = 64 kbit/s
>        Channel ID i = 0xA9839F
>                Exclusive, Channel 31
>        Calling Party Number i = 0x0081, '02082696700'
>                Plan:Unknown, Type:Unknown
>        Called Party Number i = 0x80, '01212548185'
>                Plan:Unknown, Type:Unknown
>Jun 21 08:27:26.438: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8  callref = 0x9B5C
>        Channel ID i = 0xA9839F
> 
>
>un 21 08:34:17.500: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8  callref = 0x1B62
>        Sending Complete
>        Bearer Capability i = 0x8090A3
>                Standard = CCITT
>                Transfer Capability = Speech
>                Transfer Mode = Circuit
>                Transfer Rate = 64 kbit/s
>        Channel ID i = 0xA9839C
>                Exclusive, Channel 28
>        Calling Party Number i = 0x0081, '2036132'
>                Plan:Unknown, Type:Unknown
>        Called Party Number i = 0x80, '07825015577'
>                Plan:Unknown, Type:Unknown
>Jun 21 08:34:17.704: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8  callref = 0x9B62
>        Channel ID i = 0xA9839C
>                Exclusive, Channel 28
>Jun 21 08:34:19.580: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8  callref = 0x1B63
>
>***********************************************************************
> Working
>*Jun 21 09:19:09.201: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8  callref = 0x00CD
>        Sending Complete
>        Bearer Capability i = 0x8090A3
>                Standard = CCITT
>                Transfer Capability = Speech
>                Transfer Mode = Circuit
>                Transfer Rate = 64 kbit/s
>        Channel ID i = 0xA9839F
>                Exclusive, Channel 31
>        Calling Party Number i = 0x0081, '02078223798'
>                Plan:Unknown, Type:Unknown
>        Called Party Number i = 0x80, '07976596466'
>                Plan:Unknown, Type:Unknown
>*Jun 21 09:19:09.401: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8  callref = 0x80CD
>        Channel ID i = 0xA9839F
>                Exclusive, Channel 31
> 
>
>> From: rkulagow at gmail.com
>> Date: Thu, 20 Jun 2013 09:19:33 -0500
>> Subject: Re: [cisco-voip] Outgoing cLI
>> To: ckos1976 at hotmail.com
>> CC: cisco-voip at puck.nether.net
>> 
>> On Thu, Jun 20, 2013 at 7:29 AM, costas georgiou <ckos1976 at hotmail.com> wrote:
>> > Hi All,
>> >
>> > I have an MGCP and a H323 gateway and I am trying to send out the correct
>> > number. When a call is made it sends out the main number i.e. receptions
>> > number rather than the users extension. CLI is enabled by the provider.
>> > The outbound call Calling party presentation is set to default and so is the
>> > Route group. I have even amended that to Allow but still not sending the
>> > correct digits.
>> 
>> You said that you have both MGCP and H.323. Which gateway are your
>> outbound calls using?
>> 
>> Do a "debug isdn q931" and then a "term mon" and capture the output of
>> an outbound call.
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130625/50dd27c7/attachment.html>