[cisco-voip] Calls dropping

costas georgiou ckos1976 at hotmail.com
Wed Jun 26 11:03:46 EDT 2013


Hi All,
 
We have a CME gateway running at one of our sites.  Apparently calls have been dropping today.  I had a look at the logs and I could see the following:
 
Jun 26 07:33:57.786: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/0/0
Jun 26 07:33:59.622: %LINK-3-UPDOWN: Interface Serial0/0/0:15, changed state to down
Jun 26 07:34:01.622: %LINK-3-UPDOWN: Interface Serial0/0/0:15, changed state to up
Jun 26 07:34:02.038: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/0/0
Jun 26 07:35:21.786: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/0/0
Jun 26 07:35:25.038: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/0/0
Jun 26 09:06:06.857: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/0/0
Jun 26 09:06:10.109: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/0/0
Jun 26 10:25:55.761: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/0/0
Jun 26 10:25:59.013: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/0/0
Jun 26 10:29:28.761: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/0/0
Jun 26 10:29:32.013: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/0/0
Jun 26 10:32:28.761: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/0/0
Jun 26 10:32:32.013: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/0/0
Jun 26 13:53:51.652: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/0/0
Jun 26 13:53:54.904: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/0/0
Jun 26 13:54:10.652: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/0/0
Jun 26 13:54:13.904: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/0/0
Jun 26 13:54:37.652: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/0/0
Jun 26 13:54:40.904: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/0/0
Jun 26 13:56:11.652: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/0/0
Jun 26 13:56:14.904: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/0/0
Jun 26 13:58:12.652: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/0/0
Jun 26 13:58:15.904: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for Controller E1 0/0/0
Jun 26 13:59:17.716: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for Controller E1 0/0/0

I am quite sure this is a Carrier issue, I have raised it with them and they say the line is clean.  Anyone come across this befor?
 
Regards
 
Cos
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130626/4f97a693/attachment.html>


More information about the cisco-voip mailing list