[cisco-voip] Calls dropping

[Erick Wellnitz]

I've seen something like this.  I solved it by issuing the
'network-clock-select' command.


On Wed, Jun 26, 2013 at 10:03 AM, costas georgiou <ckos1976 at hotmail.com>wrote:

> Hi All,
>
> We have a CME gateway running at one of our sites.  Apparently calls have
> been dropping today.  I had a look at the logs and I could see the
> following:
>
> Jun 26 07:33:57.786: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for
> Controller E1 0/0/0
> Jun 26 07:33:59.622: %LINK-3-UPDOWN: Interface Serial0/0/0:15, changed
> state to down
> Jun 26 07:34:01.622: %LINK-3-UPDOWN: Interface Serial0/0/0:15, changed
> state to up
> Jun 26 07:34:02.038: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for
> Controller E1 0/0/0
> Jun 26 07:35:21.786: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for
> Controller E1 0/0/0
> Jun 26 07:35:25.038: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for
> Controller E1 0/0/0
> Jun 26 09:06:06.857: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for
> Controller E1 0/0/0
> Jun 26 09:06:10.109: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for
> Controller E1 0/0/0
> Jun 26 10:25:55.761: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for
> Controller E1 0/0/0
> Jun 26 10:25:59.013: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for
> Controller E1 0/0/0
> Jun 26 10:29:28.761: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for
> Controller E1 0/0/0
> Jun 26 10:29:32.013: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for
> Controller E1 0/0/0
> Jun 26 10:32:28.761: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for
> Controller E1 0/0/0
> Jun 26 10:32:32.013: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for
> Controller E1 0/0/0
> Jun 26 13:53:51.652: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for
> Controller E1 0/0/0
> Jun 26 13:53:54.904: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for
> Controller E1 0/0/0
> Jun 26 13:54:10.652: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for
> Controller E1 0/0/0
> Jun 26 13:54:13.904: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for
> Controller E1 0/0/0
> Jun 26 13:54:37.652: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for
> Controller E1 0/0/0
> Jun 26 13:54:40.904: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for
> Controller E1 0/0/0
> Jun 26 13:56:11.652: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for
> Controller E1 0/0/0
> Jun 26 13:56:14.904: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for
> Controller E1 0/0/0
> Jun 26 13:58:12.652: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for
> Controller E1 0/0/0
> Jun 26 13:58:15.904: %MARS_NETCLK-3-HOLDOVER: Exiting Holdover for
> Controller E1 0/0/0
> Jun 26 13:59:17.716: %MARS_NETCLK-3-HOLDOVER: Entering Holdover for
> Controller E1 0/0/0
>
> I am quite sure this is a Carrier issue, I have raised it with them and
> they say the line is clean.  Anyone come across this befor?
>
> Regards
>
> Cos
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130626/e025022e/attachment.html>