[cisco-voip] Bogen TAMB2 Intercom system with CUCM and 2951 intermittent ?

Fri Mar 15 11:06:57 EDT 2013

Well, we haven't had one problem with the disconnect issues with FXS ports, the TAMBs were purchased to prevent those specifically. The only problem we had, was when we misconfigured the line to have max calls 2, so basically, people could call the paging device and initiate call waiting. that was bad. 

Look for another note offline... 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 

----- Original Message -----
From: "Jason Aarons (AM)" <jason.aarons at dimensiondata.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "cisco-voip (cisco-voip at puck.nether.net)" <cisco-voip at puck.nether.net> 
Sent: Friday, March 15, 2013 11:02:13 AM 
Subject: RE: [cisco-voip] Bogen TAMB2 Intercom system with CUCM and 2951 intermittent ? 

FXS supervisory disconnect varies by product (eg CCM vs CME vs ATA vs FXS) I’ve been burned a few times using FSX before (eg unit stays offhook after making the page) with paging units. 

I want to stick with FXO. The TAMB has a lot of dip switches. I think I’m going to have to dig into the TAMB manual or contact their tech support if no one has a working FXO/TAMB setup they suggest. 

Wondering if I need to add some supervisory commands to the voice-port; 

voice-port 0/2/0 

output attenuation -3 

description Borgen TAMB2 overhead paging 

Here was our thread a couple years back on my hatred for FXS paging units; 

http://www.gossamer-threads.com/lists/cisco/nas/72974 

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Friday, March 15, 2013 10:46 AM 
To: Jason Aarons (AM) 
Cc: cisco-voip (cisco-voip at puck.nether.net) 
Subject: Re: [cisco-voip] Bogen TAMB2 Intercom system with CUCM and 2951 intermittent ? 

We use the TAMB at a few places, but we bought them specifically to be used with FXS ports off our VG248s not FXO ports. I thought you could almost connect directly to the paging system with an FXO. 

Can you try using an FXS port to see if things improve? 

Sent from my iPhone... 

"There's no place like 127.0.0.1" 

On Mar 15, 2013, at 10:36 AM, "Jason Aarons (AM)" < jason.aarons at dimensiondata.com > wrote: 

Customer has a Bogen TAMB2 paging system integrated with CUCM 8.5.1. The paging works, but not all the time, more like 50% of the time it will work and 50% of the time it will not. It seems like the calls do not always disconnect from the paging system. Does anyone have any experience with these systems having this problem? 

It is currently going out an FXO port on the voice gw (2951 with pvdm3-64) 

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.03.14 16:07:55 =~=~=~=~=~=~=~=~=~=~=~= 
term mon 
culmvoipgw1#terr m len 0 
culmvoipgw1# 
001038: Mar 14 22:08:10 MEZ: htsp_timer_stop3 
001039: Mar 14 22:08:10 MEZ: htsp_timer_stop3 
001040: Mar 14 22:08:10 MEZ: %FLEXDSPRM-5-OUT_OF_RESOURCES: No dsps found either locally or globally.htsp_setup_req 
001041: Mar 14 22:08:10 MEZ: htsp_process_event: [0/2/0, FXOLS_ONHOOK, E_HTSP_SETUP_REQ]fxols_onhook_setup 
001042: Mar 14 22:08:10 MEZ: [0/2/0] set signal state = 0xC timestamp = 0 
001043: Mar 14 22:08:10 MEZ: htsp_timer - 500 msec 
001044: Mar 14 22:08:11 MEZ: htsp_process_event: [0/2/0, FXOLS_WAIT_DIAL_TONE, E_DSP_SIG_0110]fxols_disc_clear 
001045: Mar 14 22:08:11 MEZ: htsp_timer_stop2 
001046: Mar 14 22:08:11 MEZ: htsp_process_event: [0/2/0, FXOLS_WAIT_DIAL_TONE, E_HTSP_EVENT_TIMER]fxols_wait_dial_timer htsp_dial 
001047: Mar 14 22:08:11 MEZ: htsp_process_event: [0/2/0, FXOLS_WAIT_DIAL_DONE, E_DSP_DIALING_DONE]fxols_wait_dial_done htsp_alert 
001048: Mar 14 22:08:11 MEZ: htsp_timer - 350 msec 
001049: Mar 14 22:08:11 MEZ: htsp_process_event: [0/2/0, FXOLS_WAIT_CUT_THRU, E_HTSP_EVENT_TIMER]fxols_handle_cut_thru 
001050: Mar 14 22:08:11 MEZ: htsp_timer_stop 
001051: Mar 14 22:08:15 MEZ: htsp_timer_stop3 
001052: Mar 14 22:08:15 MEZ: htsp_process_event: [0/2/0, FXOLS_OFFHOOK, E_HTSP_RELEASE_REQ]fxols_offhook_release 
001053: Mar 14 22:08:15 MEZ: htsp_timer_stop 
001054: Mar 14 22:08:15 MEZ: htsp_timer_stop2 
001055: Mar 14 22:08:15 MEZ: htsp_timer_stop3 
001056: Mar 14 22:08:15 MEZ: [0/2/0] set signal state = 0x4 timestamp = 0 
001057: Mar 14 22:08:15 MEZ: htsp_timer - 2000 msec 
001058: Mar 14 22:08:15 MEZ: htsp_process_event: [0/2/0, FXOLS_GUARD_OUT, E_DSP_SIG_0110] 
001059: Mar 14 22:08:17 MEZ: htsp_process_event: [0/2/0, FXOLS_GUARD_OUT, E_HTSP_EVENT_TIMER]fxols_guard_out_timeout 
001060: Mar 14 22:08:17 MEZ: htsp_process_event: [0/2/0, FXOLS_ONHOOK, E_DSP_SIG_0100]u all 
All possible debugging has been turned off 

_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130315/c0befe51/attachment.html>