[cisco-voip] Bogen TAMB2 Intercom system with CUCM and 2951 intermittent ?

[Paul]

I'm assuming since you have it connected to an FXO port it's connected to an external power source?




________________________________
 From: Jason Aarons (AM) <jason.aarons at dimensiondata.com>
To: Lelio Fulgenzi <lelio at uoguelph.ca> 
Cc: "cisco-voip (cisco-voip at puck.nether.net)" <cisco-voip at puck.nether.net> 
Sent: Friday, March 15, 2013 8:02 AM
Subject: Re: [cisco-voip] Bogen TAMB2 Intercom system with CUCM and 2951 intermittent ?
 

FXS  supervisory disconnect varies by product (eg CCM vs CME vs ATA vs FXS)  I’ve been burned a few times using FSX before (eg unit stays offhook after making the page) with paging units.
 
I want to stick with FXO.  The TAMB has a lot of dip switches.  I think I’m going to have to dig into the TAMB manual or contact their tech support if no one has a working FXO/TAMB setup they suggest.  
 
Wondering if I need to add some supervisory commands to the voice-port;
 
voice-port 0/2/0
output attenuation -3
description Borgen TAMB2 overhead paging
 
 
Here was our thread a couple years back on my hatred for FXS paging units;
http://www.gossamer-threads.com/lists/cisco/nas/72974
 
 
From:Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Friday, March 15, 2013 10:46 AM
To: Jason Aarons (AM)
Cc: cisco-voip (cisco-voip at puck.nether.net)
Subject: Re: [cisco-voip] Bogen TAMB2 Intercom system with CUCM and 2951 intermittent ?
 
 
We use the TAMB at a few places, but we bought them specifically to be used with FXS ports off our VG248s not FXO ports. I thought you could almost connect directly to the paging system with an FXO. 
 
Can you try using an FXS port to see if things improve?

Sent from my iPhone...
 
"There's no place like 127.0.0.1"

On Mar 15, 2013, at 10:36 AM, "Jason Aarons (AM)" <jason.aarons at dimensiondata.com> wrote:
 
>Customer has a Bogen TAMB2 paging system integrated with CUCM 8.5.1.  The paging works, but not all the time, more like 50% of the time it will work and 50% of the time it will not.  It seems like the calls do not always disconnect from the paging system.  Does anyone have any experience with these systems having this problem?  
> 
>It is currently going out an FXO port on the voice gw (2951 with pvdm3-64)
> 
>=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.03.14 16:07:55 =~=~=~=~=~=~=~=~=~=~=~=
>term mon 
>culmvoipgw1#terr m len 0
>culmvoipgw1#
>001038: Mar 14 22:08:10 MEZ: htsp_timer_stop3 
>001039: Mar 14 22:08:10 MEZ: htsp_timer_stop3 
>001040: Mar 14 22:08:10 MEZ: %FLEXDSPRM-5-OUT_OF_RESOURCES: No dsps found either locally or globally.htsp_setup_req
>001041: Mar 14 22:08:10 MEZ: htsp_process_event: [0/2/0, FXOLS_ONHOOK, E_HTSP_SETUP_REQ]fxols_onhook_setup
>001042: Mar 14 22:08:10 MEZ: [0/2/0] set signal state = 0xC timestamp = 0
>001043: Mar 14 22:08:10 MEZ: htsp_timer - 500 msec
>001044: Mar 14 22:08:11 MEZ: htsp_process_event: [0/2/0, FXOLS_WAIT_DIAL_TONE, E_DSP_SIG_0110]fxols_disc_clear
>001045: Mar 14 22:08:11 MEZ: htsp_timer_stop2 
>001046: Mar 14 22:08:11 MEZ: htsp_process_event: [0/2/0, FXOLS_WAIT_DIAL_TONE, E_HTSP_EVENT_TIMER]fxols_wait_dial_timer  htsp_dial
>001047: Mar 14 22:08:11 MEZ: htsp_process_event: [0/2/0, FXOLS_WAIT_DIAL_DONE, E_DSP_DIALING_DONE]fxols_wait_dial_done htsp_alert
>001048: Mar 14 22:08:11 MEZ: htsp_timer - 350 msec
>001049: Mar 14 22:08:11 MEZ: htsp_process_event: [0/2/0, FXOLS_WAIT_CUT_THRU, E_HTSP_EVENT_TIMER]fxols_handle_cut_thru
>001050: Mar 14 22:08:11 MEZ: htsp_timer_stop 
>001051: Mar 14 22:08:15 MEZ: htsp_timer_stop3 
>001052: Mar 14 22:08:15 MEZ: htsp_process_event: [0/2/0, FXOLS_OFFHOOK, E_HTSP_RELEASE_REQ]fxols_offhook_release
>001053: Mar 14 22:08:15 MEZ: htsp_timer_stop 
>001054: Mar 14 22:08:15 MEZ: htsp_timer_stop2 
>001055: Mar 14 22:08:15 MEZ: htsp_timer_stop3 
>001056: Mar 14 22:08:15 MEZ: [0/2/0] set signal state = 0x4 timestamp = 0
>001057: Mar 14 22:08:15 MEZ: htsp_timer - 2000 msec
>001058: Mar 14 22:08:15 MEZ: htsp_process_event: [0/2/0, FXOLS_GUARD_OUT, E_DSP_SIG_0110]
>001059: Mar 14 22:08:17 MEZ: htsp_process_event: [0/2/0, FXOLS_GUARD_OUT, E_HTSP_EVENT_TIMER]fxols_guard_out_timeout
>001060: Mar 14 22:08:17 MEZ: htsp_process_event: [0/2/0, FXOLS_ONHOOK, E_DSP_SIG_0100]u all
>All possible debugging has been turned off
>
>
>
_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip


itevomcid 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130318/a9e9a5fb/attachment.html>