[cisco-voip] Outbound Call Routing Timers

[Wes Sisk]

There are several timers that could potentially be expiring and causing the hunting. Most are under h.323 or isdn/q931. Careful review of CM SDI and SDL traces will reveal the exact condition causing the hunting - it could be something other than a timer.

-wes

On Mar 27, 2013, at 9:43 PM, Dana Tong <Dana_Tong at bridgepoint.com.au> wrote:

Hi all,
 
I have a H323 Gateway with PRI connections to multiple providers.
 
I have a CUCM Route List with two route groups configured Top-down.
I can see calls hunting to the first PRI and then hunting to the second PRI ok.
 
What I would like to do is extend the timer of the call setup to the first PRI before it tries to route to the second PRI.
 
Does anyone know what timer this is? Would it be in the UCM Service Parameters for “clusterwide parameters – H323”?
 
Cheers
Dana
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130328/6526e927/attachment.html>