[cisco-voip] Call Forward All With Line/Device CSS

[Tim Kenyon]

I am  designing on the fly, so I would go with the assumption that I either have PS-ALI set or I would use a service bureau and route all my calls out to someone like 911ETC with the proper ELIN that I want to define, route all 911 calls out a single SIP trunk to their data center and they would position the call back into the carrier network at the right location.

Trying to develop a solution to replace CER.

So, was YOUR system rewriting as the billing number or the carrier was automatically when you sent the call? Like I said, I want to send a specific ANI for the device when it dials 911 that is relevant to the location of the device, not their actual DID.

Tim

From: Scott Voll [mailto:svoll.voip at gmail.com]
Sent: Wednesday, May 01, 2013 1:58 PM
To: Tim Kenyon
Cc: Francisco Fossa; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Call Forward All With Line/Device CSS

depends on your setup.  if you have a PS-ALI contract or not.  for my previous employer, it got re-wrote as the billing number since there was not contract.

Scott

On Wed, May 1, 2013 at 9:39 AM, Tim Kenyon <tim at conveyant.com<mailto:tim at conveyant.com>> wrote:
Were you able to correct the outbound ANI (ELIN) to be representative of the location of the device dialing 911 instead of just that individuals actual DID number?

Tim

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>] On Behalf Of Scott Voll
Sent: Wednesday, May 01, 2013 9:58 AM
To: Francisco Fossa
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Call Forward All With Line/Device CSS

in my previous job, without CER, we used the Device CSS for 911 to the local VGW, then used the Line CSS for what access they got.  That way if they had EM you still had the correct 911 routing, but could limit or allow Calling based on the line.

YMMV

Scott

On Tue, Apr 30, 2013 at 2:12 PM, Francisco Fossa <franciscofossa at gmail.com<mailto:franciscofossa at gmail.com>> wrote:
Hi
This is my first post for the list, so please be gentle... I am still
unsure on how to use this, it has been a while since I've been using
real mailing lists.
On Arrasmith problem: What about moving 911 to Null PT... specially if
it's only in the US, you can then use your CSS for forwarding too.

Regards

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130501/a71868cf/attachment.html>