[cisco-voip] Privacy headers support

Maciej Bylica mbsip at gazeta.pl
Mon May 6 10:35:57 EDT 2013


Hello Robert,

Thanks for the hint. I am about to check this out.
What IOS version are you working on ? Is it 15.x?

Thanks,
Mac


2013/5/2 Robert Kulagowski <rkulagow at gmail.com>

> On Thu, May 2, 2013 at 9:37 AM, Maciej Bylica <mbsip at gazeta.pl> wrote:
> > Guys,
> >
> > Do you have any ideas how to set the privacy up?
>
> I've been having similar questions and here's what I have which seems
> to work for me. I'm still in "test" mode though.
>
> voice class sip-profiles 200
>  request INVITE sip-header Remote-Party-ID add "Remote-Party-ID:
> \"UNKNOWN\" <sip:0000000000 at xx.xx.xx.xx
> >;party=calling;screen=yes;privacy=full"
>
> dial-peer voice 10000 voip
>  description Outbound SIP to Bandwidth.com
>  translation-profile outgoing SIP-OUT
>  preference 1
>  destination-pattern 8T
>  session protocol sipv2
>  session target dns:ot.bandwidth.com
>  voice-class sip dtmf-relay force rtp-nte
>  voice-class sip profiles 200
>  dtmf-relay rtp-nte
>  codec g711ulaw
>  fax-relay ecm disable
>  fax rate 9600
>  fax protocol pass-through g711ulaw
>  ip qos dscp cs5 media
>  ip qos dscp cs4 signaling
>  no vad
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130506/282af2b3/attachment.html>


More information about the cisco-voip mailing list