[cisco-voip] 8945 to Polycom rmx

Scott Voll svoll.voip at gmail.com
Wed May 8 15:44:26 EDT 2013


upon further messing around, we find after connecting, if we press the swap
button, if brings up the other video(small box) , press it again then it
goes to full screen.

Still kind of weird.  Might open a TAC case.

Scott


On Wed, May 8, 2013 at 11:40 AM, Wes Sisk <wsisk at cisco.com> wrote:

> There are several issues in this area. Most common recommendations seem to
> be:
>
> 1. limit video bw to 384k. larger values create interop failures
> 2. upgrade 8945 to 9.3 release based to get fix for CSCtj70239    Video
> cutthrough time is 1120-1200ms
> 3. open a TAC case for further investigation
>
> -Wes
>
> On May 8, 2013, at 11:31 AM, Scott Voll <svoll.voip at gmail.com> wrote:
>
> Any reason that a Polycom RMX running 7.6.0.173 would not recieve video
> from a 8945 running Firmware 9.2.3.5 with CM 8.6.2?
>
> TIA
>
> Scott
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130508/f1f57a89/attachment.html>


More information about the cisco-voip mailing list