[cisco-voip] increase volume inbound on MGCP VGW

[Erick Wellnitz]

There are actually standards that pertain to loss between phones.

Try:
Input gain -6
output attenuation 6

This worked for me a few weeks back.




On Fri, May 17, 2013 at 9:53 AM, Scott Voll <svoll.voip at gmail.com> wrote:

> I have a VGW running MGCP and everyone has suggested that calls into / out
> of are soft on the PSTN side of the call.
>
> Currently all VGW's are set to:
>
> input Gain: -2
> Output Attenuation : 3
>
> How would I adjust this to make the PSTN side of the call louder?  Without
> causing echo =)
>
> TIA
>
> Scott
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130517/29b5b44f/attachment.html>