[cisco-voip] Cisco EX90 work as standalone?

[sheref_hf at hotmail.com]

Thanks friends for your support
I have another question ... to use cisco EX90 .. how much bandwidth needed ...? Is internet line with 2 Mbps enough or not?

BR,
Sherif Ibrahim Mohamed
Network Engineer
CCVP, CCNP

--- Sent from Samsung GN8000 ---

--- Original Message ---

From: "Nick Matthews" <matthnick at gmail.com>
Sent: 28 May 2013 18:00
To: "Chris Ward (chrward)" <chrward at cisco.com>
Cc: "sheref hf" <sheref_hf at hotmail.com>, cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cisco EX90 work as standalone?

I've set up POCs with customers before without VCS or CUCM.  Basically just
tell the unit there's no gatekeeper, assign a static address, and then dial
by IP addresses to the other units.  I don't believe it will do URI dialing
without some sort of call agent though.  This is obviously not a full
featured solution, but it can help when you're in a pinch.

-nick


On Tue, May 28, 2013 at 9:43 AM, Chris Ward (chrward) <chrward at cisco.com>wrote:

>  It can register to VCS or CUCM. The CUCM method is obviously a little
> more familiar to those who have CUCM experience. If you just have a VCS and
> an EX90 the process still isn’t what I would call complicated.****
>
> ** **
>
> Give this a read for VCS:****
>
>
> http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/admin_guide/Cisco_VCS_Administrator_Guide_X7-2.pdf
> ****
>
> ** **
>
> If it’s just a lab setup, then you should look at the section called
> “Authentication using the Local Database”.****
>
> ** **
>
> +Chris****
>
> Unity Connection TME****
>
> ** **
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *sheref hf
> *Sent:* Tuesday, May 28, 2013 9:02 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Cisco EX90 work as standalone?****
>
> ** **
>
> Hi friends,****
>
> ** **
>
> Have a nice day****
>
> Is the Cisco EX90 can work as standalone device or must register with VCS
> application ???****
>
> If so, How can I configure it???****
>
> ** **
>
> Thanks****
>
> BR,
> Sherif Ibrahim Moahmed
> Network Engineer
> CCVP, CCNP****
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130528/95149db0/attachment.html>