[cisco-voip] Subscriber DB sync issue

[Eric Pedersen]

This is a great troubleshooting document.
https://supportforums.cisco.com/docs/DOC-13672

I'd start with "utils dbreplication reset".

Eric


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of vignesh sethuraman
Sent: 04 November 2013 12:33 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Subscriber DB sync issue

utils dbreplication status is showing as "Sync target Server is not defined for the replicate ccmdbtemplate".

could you please some one guide me to understand this.

Thanks & Regards,
Vignesh S

On Monday, 4 November 2013 8:28 PM, vignesh sethuraman <sethuvignesh at yahoo.co.in<mailto:sethuvignesh at yahoo.co.in>> wrote:
Hello All,

 I checked if DB sync is proper, but when I issued the command "utils dbreplication runtimestate", I could see RPC is shown as offline and the Replication status as N/A for my subscriber. The DBver& Tables is also showing as N/A.

Can you please someone point out the steps (order of operation) I need to resolve the dbreplication issue.

Thanks & Regards,
Vignesh S


The contents of this message may contain confidential and/or privileged
subject matter. If this message has been received in error, please contact
the sender and delete all copies. Like other forms of communication,
e-mail communications may be vulnerable to interception by unauthorized
parties. If you do not wish us to communicate with you by e-mail, please
notify us at your earliest convenience. In the absence of such
notification, your consent is assumed. Should you choose to allow us to
communicate by e-mail, we will not take any additional security measures
(such as encryption) unless specifically requested.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131104/a167dce3/attachment.html>