[cisco-voip] R: R: From two Cluster to One Cluster - How to?

Sat Nov 9 16:53:49 EST 2013

Thank you for all answers Guys,

  for License I will Open a TAC case and I will use ESW and UCSS obtained
from the migration license sold to the Customer.

Regards

Alessandro

Da: Ryan Ratliff (rratliff) [mailto:rratliff at cisco.com] 
Inviato: mercoledì 6 novembre 2013 17:53
A: Alessandro Bertacco
Cc: Heim, Dennis; tdennis at DataSourcePro.com; Kenneth Hayes; cisco-voip voyp
list
Oggetto: Re: [cisco-voip] R: From two Cluster to One Cluster - How to?

You'll need to open a case with the Licensing TAC to do the migration from
6.x to 9.x so just explain that you're consolidating clusters.  They should
be able to add the exported data from one cluster to the existing license
for the other.  You will need both clusters on 9.1(2) however if you are
going to jump the 6.x one. 

-Ryan 

On Nov 5, 2013, at 8:47 AM, Alessandro Bertacco
<bertacco.alessandro at alice.it> wrote:

Hi Dennis, thank you.

No LDAP Sync.

CUCM DB independent from Active Directory.

Ok for the migration using Vmware from 6.1.3. to 9.1.1, I've already done
this before and I know it's working, but is a lot of work. Anyway I think
this is the right way!

What about license?

AB

Da: Heim, Dennis [mailto:Dennis.Heim at wwt.com] 
Inviato: martedì 5 novembre 2013 13:49
A: tdennis at DataSourcePro.com; 'Alessandro Bertacco'; 'Kenneth Hayes'
Cc: cisco-voip at puck.nether.net
Oggetto: RE: [cisco-voip] R: From two Cluster to One Cluster - How to?

I would take the 6.1 cluster and migrated it into vmware, and upgrade it
with the jump process. 6.1(x)->6.1(5)->9.1(2). From there then I would
rename the system elements (device-pools, etc), and clean up the dial-plan
how you want it to fit in the condensed cluster. Then do you data export.
Then you should be about 95% of the way there. If you export at the 6.x
level, you will need to do lots of data manipulation to make the import 9.x
compatible. Plus this will give you sometime to set owner-id’s etc.

Are you LDAP sync’d?

Then you 

Dennis Heim | Solution Architect (Collaboration)

World Wide Technology, Inc. | 314-212-1814

PS Engineering:  Innovate & Ignite.

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
Travis L. Dennis
Sent: Tuesday, November 05, 2013 5:53 AM
To: 'Alessandro Bertacco'; 'Kenneth Hayes'
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] R: From two Cluster to One Cluster - How to?

You can start a TAC case and Cisco licensing will issue you a new license
file for the 9.1 cluster that will cover the devices from the 6.x cluster.
If both are covered with ESW/UCSS it will make the process easier.

I think you should be able to BAT the phones out from the 6.x cluster over
to the 9.1 cluster.  Not sure if the version mis-match will cause any issues
though

Travis

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
Alessandro Bertacco
Sent: Tuesday, November 05, 2013 5:58 AM
To: 'Kenneth Hayes'
Cc: cisco-voip at puck.nether.net
Subject: [cisco-voip] R: From two Cluster to One Cluster - How to?

Hi Kenneth, intercluster trunk already is Up and Running.

Customer wants Only one DB and only one management point!

AB

Da: Kenneth Hayes [mailto:kennethwhayes at gmail.com] 
Inviato: martedì 5 novembre 2013 11:51
A: Alessandro Bertacco
Cc: <cisco-voip at puck.nether.net>
Oggetto: Re: [cisco-voip] From two Cluster to One Cluster - How to?

Maybe a thought but inter-cluster trunking?

Sent from my iPhone

On Nov 5, 2013, at 5:47 AM, "Alessandro Bertacco"
<bertacco.alessandro at alice.it> wrote:

Hi Guys,

   some questions for you.

Two customer:

Customer A has a Cisco CUCM9.1.1 with 600 devices 3 servers, 1 PUB and 2 SUB

Customer B has a Cisco CUCM6.1.3 with 400 devices 2 servers, 1 PUB and 1 SUB

Requirements:

Customer A and B join each other becoming a big one Enterprise C

Customer C, wants one Clusterwide Cisco CUCM9.1.1 with 1 PUB and 4 SUB,
using existing Cluster A.

Questions:

How I can migrate license from Cluster B in to existing Cluster A?

Can I export Users, Device and Direcotry Numbers in to existing Cluster A?

Thank yoy all guys.

Regards

Alessandro

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131109/54c6470a/attachment.html>