[cisco-voip] Directory URI in LDAP sync

[Erick B.]

After upgrade from 8.x to 9.x, the field is not mapped to LDAP attribute
(is blank). You need to add new LDAP directory entry to get that field
mapped or go under Call Routing -> Directory Number and Directory URI and
set each DN and Directory URI setting there.

The SIP URI is used for telepresence mainly so people call you at
userid at domainname.com from a video device.

Still learning this...


On Mon, Nov 18, 2013 at 11:27 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> Can anyone comment/elaborate on what the Directory URI is used for in the
> LDAP sync setup screen in v9? It's set to "msRTCSIP-primaryuseraddress" by
> default. Unfortunately it's not modifiable after the relationship is setup
> and I'm not sure what to set it to.
>
> I'll also have to see what value it takes during an upgrade
>
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmcfg/CUCM_BK_CDF59AFB_00_admin-guide_chapter_01100.html#CUCM_RF_LE051F5C_00
>
>
> Sent from my iPhone
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131118/e0efeb1b/attachment.html>