[cisco-voip] Directory URI in LDAP sync

[Jason Aarons (AM)]

I was thinking SIP URI shouldn't really be video or audio specific (based on the SDP in the invite).  So you could call email at domain.com<mailto:email at domain.com> and get whatever is available.  Be it audio or video in the SDP.  Register your phone or your EX90 and both ring like a shared line, etc.

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick B.
Sent: Monday, November 18, 2013 2:47 PM
To: Lelio Fulgenzi
Cc: cisco-voip voyp list
Subject: Re: [cisco-voip] Directory URI in LDAP sync


After upgrade from 8.x to 9.x, the field is not mapped to LDAP attribute (is blank). You need to add new LDAP directory entry to get that field mapped or go under Call Routing -> Directory Number and Directory URI and set each DN and Directory URI setting there.

The SIP URI is used for telepresence mainly so people call you at userid at domainname.com<mailto:userid at domainname.com> from a video device.

Still learning this...

On Mon, Nov 18, 2013 at 11:27 AM, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:
Can anyone comment/elaborate on what the Directory URI is used for in the LDAP sync setup screen in v9? It's set to "msRTCSIP-primaryuseraddress" by default. Unfortunately it's not modifiable after the relationship is setup and I'm not sure what to set it to.

I'll also have to see what value it takes during an upgrade


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmcfg/CUCM_BK_CDF59AFB_00_admin-guide_chapter_01100.html#CUCM_RF_LE051F5C_00


Sent from my iPhone
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip



itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131118/789c8aaf/attachment.html>