[cisco-voip] Unity CxN 9.1.2 E164 on Primary

[Nate VanMaren]

+ on primary starts working in 9.0.

I have it on lots of systems.  Do you see the right calling number in the port status monitor or RTMT?

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Joe Pollere (AM)
Sent: Thursday, November 21, 2013 5:53 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity CxN 9.1.2 E164 on Primary

Have Unity Cxn 9.1.2 with E164 configured on Primary Extn. When someone presses their messages button Unity is not recognizing the extension. It works fine if I define the E164 extn as an alternate. (Leaving messages works fine in both cases.)

I thought starting with 8.6 E164 on primary was supported. Anyone having a similar issue?

Thanks

Joe


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131121/a28fc0cd/attachment.html>