[cisco-voip] Xlite SIP Phone to CUCM 8.6

[vignesh sethuraman]

yes kenneth...did that already.

I am getting an error stating "Account failed to enable".

Thanks,
Vignesh


________________________________
 From: Kenneth Hayes <kennethwhayes at gmail.com>
To: vignesh sethuraman <sethuvignesh at yahoo.co.in> 
Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net> 
Sent: Friday, 4 October 2013 2:37 PM
Subject: Re: [cisco-voip] Xlite SIP Phone to CUCM 8.6
 


Have you assigned the user ID to the phone and the SIP realm config to the phone as well?

Sent from my iPhone

On Oct 4, 2013, at 8:32 AM, vignesh sethuraman <sethuvignesh at yahoo.co.in> wrote:


Dear All,
>
>
>I was trying to register Xlite-4 SIP Phone to CUCM 8.6. I followed the blog post http://www.markholloway.com/blog/?p=1111.
>
>
>I created a seperate Device Security Profile with "Digest Authentication" enabled instead of SIP Trunk Security Profile as shown in the blog and selected it as the Device Security Profile for the Xlite.
>
>
>Xlite-4 SIP phone is not registering to the CUCM. 
>
>
>
>Could you please help.
>
>
>Thanks,
>Vignesh
>
>
>
>
_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131004/eac54d0d/attachment.html>