[cisco-voip] Xlite SIP Phone to CUCM 8.6

[Mark Holloway]

You may have to go under Topology and click Use Local IP, and disable STUN, ICE, etc.. I also recommend going to Advanced and turn off SIP Keepalive. Use Wireshark to capture SIP registration attempts.  

On Oct 4, 2013, at 9:41 AM, vignesh sethuraman <sethuvignesh at yahoo.co.in> wrote:

> yes kenneth...did that already.
> 
> I am getting an error stating "Account failed to enable".
> 
> Thanks,
> Vignesh
> 
> From: Kenneth Hayes <kennethwhayes at gmail.com>
> To: vignesh sethuraman <sethuvignesh at yahoo.co.in> 
> Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net> 
> Sent: Friday, 4 October 2013 2:37 PM
> Subject: Re: [cisco-voip] Xlite SIP Phone to CUCM 8.6
> 
> Have you assigned the user ID to the phone and the SIP realm config to the phone as well?
> 
> Sent from my iPhone
> 
> On Oct 4, 2013, at 8:32 AM, vignesh sethuraman <sethuvignesh at yahoo.co.in> wrote:
> 
>> Dear All,
>> 
>> I was trying to register Xlite-4 SIP Phone to CUCM 8.6. I followed the blog post http://www.markholloway.com/blog/?p=1111.
>> 
>> I created a seperate Device Security Profile with "Digest Authentication" enabled instead of SIP Trunk Security Profile as shown in the blog and selected it as the Device Security Profile for the Xlite.
>> 
>> Xlite-4 SIP phone is not registering to the CUCM. 
>> 
>> Could you please help.
>> 
>> Thanks,
>> Vignesh
>> 
>> 
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131004/89518916/attachment.html>