[cisco-voip] Bulk insert E164 DID

[Pavan K]

Thanks guys,
Looks like my only way out is to use dummy macs. I was hoping there was a
better way of doing this.

BTW this is basically for Pre- provisioning DN so I don't have the phones
On Oct 4, 2013 10:17 AM, "Anthony Holloway" <avholloway+cisco-voip at gmail.com>
wrote:

> Hi Tim, I know you are asking Pavan, but that is exactly how I tested, and
> it still failed with my previously documented error message.
>
> Starting DN number can only contain digits when performing bulk insert.
>
> Here is the source code which performs the validation on DN bulk insert.
> You should notice that the parseInt() function creates a number from a
> string, and therefore, "\+16125551212" would not pass this check.
> Possible feature enhancement?  Maybe.
>
>         var startNum = parseInt(elStart.value);
>         var endNum = parseInt(elEnd.value);
>
>         if (isNaN(startNum))
>         {
>             showValidationError(elStart, 'Starting DN number can only contain digits when performing bulk insert.', 1);
>
>             return false;
>         }
>
>         if (isNaN(endNum))
>         {
>             showValidationError(elEnd, 'Ending DN number can only contain digits when performing bulk insert.', 1);
>             return false;
>
>         }
>
>         // make sure start and end range is valid
>         if (startNum > endNum)
>         {
>             showValidationError(elStart, 'Invalid DN Range.', 1);
>             return false;
>
>         }
>
>         // make sure no more than 500 DNs max can be inserted
>         var totaldn = endNum - startNum + 1;
>         if (totaldn > 500)
>         {
>             var msg = 'Invalid DN Range.';
>
>             msg += 'Only 500 directory numbers can be inserted at one time.';
>             showValidationError(elStart, msg, 1);
>             return false;
>         }
>
>
>
> On Fri, Oct 4, 2013 at 8:56 AM, Tim Smith <smithsonianwa at gmail.com> wrote:
>
>> Oh also, can you escape the + in bulk insert?
>> I.e. \+
>>
>> Cheers,
>>
>> Tim
>>
>> On Friday, 4 October 2013, Pavan K wrote:
>>
>>> Folks,
>>> If i need to bulk insert 1000 sequential e164 directory numbers in ucm
>>> 9.1, what's the best way to do that ?
>>>
>>> I can't use the bulk insert on the directory number page as it rejects
>>> numbers that start with +
>>>
>>> I can't seem to use BAT as these numbers don't have phones associated
>>> with them and consequently no Mac addresses for bulk insert of DN.
>>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131004/c4c0b7d6/attachment.html>