[cisco-voip] VG-248 SIP Faxing

Jason Aarons (AM) jason.aarons at dimensiondata.com
Tue Oct 15 08:48:33 EDT 2013


SCCP on VG224 is non-standards based T.38

SIP is standards based T.38

The two are not compatible.

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike
Sent: Tuesday, October 15, 2013 8:36 AM
To: 'Cisco VOIP'
Subject: [cisco-voip] VG-248 SIP Faxing


Hey all I have a situation where the company is switching over from PRI to SIP, but they have a VG-248 hanging off CUCM.

SIP-->CUBE-->CUCM-->VG248

The VG248 ports are registered as SCCP VGC devices. Is this supported? I know the VG-248 doesn't support T.38 fax protocol, but I'm doing G711 to the provider and wondering if it works without config changes.

Thanks,
Mike


itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131015/be35f531/attachment.html>


More information about the cisco-voip mailing list