[cisco-voip] VG-248 SIP Faxing

[Mike]

So it won't work? Do I need to switch over to a VG224 and run SIP?

 

From: Jason Aarons (AM) [mailto:jason.aarons at dimensiondata.com] 
Sent: Tuesday, October 15, 2013 8:49 AM
To: Mike ; 'Cisco VOIP'
Subject: RE: [cisco-voip] VG-248 SIP Faxing

 

SCCP on VG224 is non-standards based T.38

 

SIP is standards based T.38

 

The two are not compatible.

 

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
Mike 
Sent: Tuesday, October 15, 2013 8:36 AM
To: 'Cisco VOIP'
Subject: [cisco-voip] VG-248 SIP Faxing

 

 

Hey all I have a situation where the company is switching over from PRI to
SIP, but they have a VG-248 hanging off CUCM.

 

SIP-->CUBE-->CUCM-->VG248

 

The VG248 ports are registered as SCCP VGC devices. Is this supported? I
know the VG-248 doesn't support T.38 fax protocol, but I'm doing G711 to the
provider and wondering if it works without config changes.

 

Thanks,

Mike



itevomcid 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20131015/b2f33864/attachment.html>