[cisco-voip] 8945 can't place call while call is ringing in

[Nate VanMaren]

Maybe add new call to the ring-in state on the softkey template?  But do the 8945s use softkey template yet?

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick Wellnitz
Sent: Monday, September 09, 2013 11:29 AM
To: Ryan Ratliff (rratliff)
Cc: cisco-voip
Subject: Re: [cisco-voip] 8945 can't place call while call is ringing in

Based on your question am I correct in thinking this is the expected behavior across all phone models?

On Mon, Sep 9, 2013 at 12:15 PM, Ryan Ratliff (rratliff) <rratliff at cisco.com<mailto:rratliff at cisco.com>> wrote:
Is there a method you use on other phones to accomplish the same results?

-Ryan

On Sep 9, 2013, at 11:23 AM, Erick Wellnitz <ewellnitzvoip at gmail.com<mailto:ewellnitzvoip at gmail.com>> wrote:

I'm at a loss here.

We have 8945 phones.

Is there any way to place an outbound call while a call is ringing in without using idivert and without adding a second line to the phone?  We don't want clients to know they've been purposely diverted to voicemail should one of our stronger willed partners want to make an outbound call while a call is ringing in.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130909/e079d985/attachment.html>