[cisco-voip] 8945 can't place call while call is ringing in

[Erick Wellnitz]

There is no new call option for ring in


On Mon, Sep 9, 2013 at 12:32 PM, Nate VanMaren <VanMarenNP at ldschurch.org>wrote:

>  Maybe add new call to the ring-in state on the softkey template?  But do
> the 8945s use softkey template yet?****
>
> ** **
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Erick Wellnitz
> *Sent:* Monday, September 09, 2013 11:29 AM
> *To:* Ryan Ratliff (rratliff)
> *Cc:* cisco-voip
> *Subject:* Re: [cisco-voip] 8945 can't place call while call is ringing in
> ****
>
> ** **
>
> Based on your question am I correct in thinking this is the expected
> behavior across all phone models?****
>
> ** **
>
> On Mon, Sep 9, 2013 at 12:15 PM, Ryan Ratliff (rratliff) <
> rratliff at cisco.com> wrote:****
>
> Is there a method you use on other phones to accomplish the same results?
>
> -Ryan
>
> On Sep 9, 2013, at 11:23 AM, Erick Wellnitz <ewellnitzvoip at gmail.com>
> wrote:
>
> I'm at a loss here.
>
> We have 8945 phones.
>
> Is there any way to place an outbound call while a call is ringing in
> without using idivert and without adding a second line to the phone?  We
> don't want clients to know they've been purposely diverted to voicemail
> should one of our stronger willed partners want to make an outbound call
> while a call is ringing in.
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip****
>
>  ** **
>
>
>
> NOTICE: This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged information. Any
> unauthorized review, use, disclosure or distribution is prohibited. If you
> are not the intended recipient, please contact the sender by reply email
> and destroy all copies of the original message.****
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130909/2e09c222/attachment.html>