[cisco-voip] PWRECOVERY does not work on CUCM 8.6.2

[Ted Nugent]

ditto... when changing the password it would only recognize lowercase
letters and anything that required the "shift" key if i remember
correctly... very odd.


On Mon, Sep 9, 2013 at 7:04 PM, Angel Moon <amoon at datasourcepro.com> wrote:

> I ran into a scenario where I changed the password to something with upper
> and lower case letters and after a while figured out the system had
>  ignored  uppercase.  I typed in the password with all lower case and got
> in.  Just a shot in the dark for you.****
>
> ** **
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Jonathan Charles
> *Sent:* Monday, September 09, 2013 5:00 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] PWRECOVERY does not work on CUCM 8.6.2****
>
> ** **
>
> Running CUCM 8.6.2.20000-2****
>
> ** **
>
> run pwrecovery for OS password, says password is changed, but cannot log
> in with new password.****
>
> ** **
>
> TAC says to rebuild (they cannot create remote access account to fix issue
> due to not being able to get access to OS)... but recent backup is old....
> ****
>
> ** **
>
> Any way to get around this?****
>
> ** **
>
> ** **
>
> ** **
>
> Jonathan****
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130909/3b6d80d9/attachment.html>