[cisco-voip] Forced Authorization Code Phone wait always 15sec before route call

[Alessandro Bertacco]

Hello Guys,

  I've this problem.

 

CUCM 9.1.1 - Phone 6921 SCCP- Firmware 9.3.3.2

 

FAC implemented for External call control.

 

The procedure is: Phone request to insert FAC code -->  insert code and
after press # key to route immediately the Call, but system ignore the
terminating # and  alway wait 15 seconds before route the call.

 

 

Also I've modified T302 Timer to 5 second, nothing!!!

 

Any Idea?

 

Thank you!

 

Regards

 

Alessandro Bertacco

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130918/bb0958da/attachment.html>