[cisco-voip] Change Cisco Emergency Responder 9.0 IP...

[Jonathan Charles]

So, no need to change IP at Server Settings like in the first doc?


On Thu, Sep 19, 2013 at 1:57 PM, Brian Meade (brmeade) <brmeade at cisco.com>wrote:

>  What does “show tech network hosts” show?  Old IP or new?  Also, what
> does “run sql select * from cerremote” show?****
>
> ** **
>
> *From:* Jonathan Charles [mailto:jonvoip at gmail.com]
> *Sent:* Thursday, September 19, 2013 2:55 PM
>
> *To:* Brian Meade (brmeade)
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Change Cisco Emergency Responder 9.0 IP...****
>
> ** **
>
> Just a single node... one boring server with no intentions (yet) to add a
> second...****
>
> ** **
>
> We are also not using DNS for this.****
>
> ** **
>
> On Thu, Sep 19, 2013 at 1:54 PM, Brian Meade (brmeade) <brmeade at cisco.com>
> wrote:****
>
> Jonathan,****
>
>  ****
>
> Yea, I just noticed that.****
>
>  ****
>
> Are you using a single node or pub/sub?****
>
>  ****
>
> If pub/sub, which IP address did you change?  Both?****
>
>  ****
>
> Brian****
>
>  ****
>
> *From:* Jonathan Charles [mailto:jonvoip at gmail.com]
> *Sent:* Thursday, September 19, 2013 2:53 PM
> *To:* Brian Meade (brmeade)
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Change Cisco Emergency Responder 9.0 IP...****
>
>  ****
>
> That was the link I posted, it doesn't work.****
>
>  ****
>
> You will also note, that the links are the same for version 1.X all the
> way to 9.X... which is kind of impossible...****
>
>  ****
>
>  ****
>
> Jonathan****
>
>  ****
>
> On Thu, Sep 19, 2013 at 1:46 PM, Brian Meade (brmeade) <brmeade at cisco.com>
> wrote:****
>
> Jonathan,****
>
>  ****
>
> Here’s the guide for CER 9.0:
> http://www.cisco.com/en/US/partner/products/sw/voicesw/ps842/products_tech_note09186a0080c13fb6.shtml
> ****
>
>  ****
>
> Full version list available here-
> http://www.cisco.com/en/US/partner/products/sw/voicesw/ps842/prod_tech_notes_list.html
> ****
>
>  ****
>
> Brian****
>
>  ****
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Jonathan Charles
> *Sent:* Thursday, September 19, 2013 2:41 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Change Cisco Emergency Responder 9.0 IP...****
>
>  ****
>
> Staged CER 9.0.2.10000-1 on our test network, need to change IP to deploy
> to customer and after following these instructions:****
>
>  ****
>
>
> http://www.cisco.com/en/US/products/sw/voicesw/ps842/products_tech_note09186a0080c13fb6.shtml
> ****
>
>  ****
>
> Link is for changing IP on 8.6.1, but could not find any better
> instructions for 9.0****
>
>  ****
>
>  ****
>
> After a reboot, I just get a 500 Internal Server error going to the login
> page.****
>
>  ****
>
> I change the IP back and it works fine...****
>
>  ****
>
> What am I doing wrong?****
>
>  ****
>
>  ****
>
>  ****
>
> Jonathan****
>
>  ****
>
> ** **
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130919/79cc38aa/attachment.html>