[cisco-voip] srst config

[Jose Colon II]

Seems to work for me so far. I know when I set these up they are able to
call out without being connected to call manager.
On Sep 24, 2013 6:12 PM, "Shaihan Jaffrey" <schaehan at gmail.com> wrote:

> Thanks, is this config enough for getting the calls out to the pstn.
>
> Regards.
> On 24 Sep 2013 23:51, "Jose Colon II" <jcolon424 at gmail.com> wrote:
>
>> Here is the config I use on my routers
>>
>> call-manager-fallback
>>  secondary-dialtone 9
>>  max-conferences 2 gain -6
>>  transfer-system full-consult
>>  ip source-address xxx.xxx.xxx.xxx port 2000
>>  max-ephones 10
>>  max-dn 20 dual-line
>>  date-format dd-mm-yy
>>
>>
>> On Tue, Sep 24, 2013 at 10:45 AM, Shaihan Jaffrey <schaehan at gmail.com>wrote:
>>
>>> What are the commands to configure SRST on H323 voice gateway.
>>> and how to enable PSTN calls when in SRST mode..
>>>
>>> Regards.
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130924/aa143c73/attachment.html>