[cisco-voip] srst config

[Shaihan Jaffrey]

Thanks, is this config enough for getting the calls out to the pstn.

Regards.
On 24 Sep 2013 23:51, "Jose Colon II" <jcolon424 at gmail.com> wrote:

> Here is the config I use on my routers
>
> call-manager-fallback
>  secondary-dialtone 9
>  max-conferences 2 gain -6
>  transfer-system full-consult
>  ip source-address xxx.xxx.xxx.xxx port 2000
>  max-ephones 10
>  max-dn 20 dual-line
>  date-format dd-mm-yy
>
>
> On Tue, Sep 24, 2013 at 10:45 AM, Shaihan Jaffrey <schaehan at gmail.com>wrote:
>
>> What are the commands to configure SRST on H323 voice gateway.
>> and how to enable PSTN calls when in SRST mode..
>>
>> Regards.
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130925/10de3077/attachment.html>