[cisco-voip] VG224 configuration

Matthew Saskin msaskin at gmail.com
Wed Apr 2 20:15:03 EDT 2014


Not to mention there are probably better (better being subjective of
course) ways to do this. In the past, I've found Quintum boxes a pretty
cost effective way to do analog/tdm to IP bridging at small scale, and
Dialogic at large scale.
On Apr 2, 2014 7:42 PM, "Tim Smith" <tim.smith at enject.com.au> wrote:

>  Hi,
>
>
>
> In theory, you could probably make this work, but I think it would be
> considered an unusual application for these boxes.
>
> Their typical application is to provide analog connectivity for endpoints
> (i.e. modems, faxes, analog handsets) into a Cisco IPT environment, i.e.
> typical CUCM or CME call control.
>
>
>
> The ports are FXS so you would need FXO interfaces on your PBX (you have
> limited features available here compared to ISDN for example)
>
> You can send and receive calls via SIP to the VG224 (they can also run
> MGCP, SCCP and H323)
>
> Normally you would be sending and receiving calls to and from a CUCM for
> example
>
>
>
> Just search cisco.com and cisco.com support forums and you should find
> sample configs. Probably best to have a crack at it first, then post your
> findings and any further questions.
>
>
>
> If you provide more background, there is likely a better solution. (Just
> because we can make something work, doesn't mean we should do it in
> production)
>
> In general I would think a typical ISR router 29XX / 39XX would probably
> be more suitable (and flexible)
>
> And something like ISDN would be nicer for connecting two systems
>
>
>
> Cheers,
>
>
>
> Tim
>
>
>
>
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Sivakumar Donthamchetty
> *Sent:* Thursday, 3 April 2014 9:50 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] VG224 configuration
>
>
>
> Hi All,
>
>
>
> Wanted to check first of all if I can use VG224 for converting SIP calls
> to analog so that I can connect the Analog interface to a PBX.
>
>
>
> If so, can some one send me a sample configuration.
>
>
>
> Also, does the image file on the GW matters or any image should work?
>
>
>
> Regards
>
> Siva
>
>
>
> *Datek Systems Inc. DBA VoipXchange, Inc.*
>
> *240 E. Gish Rd.*
>
> *San Jose, CA. 95112*
>
> *PH: (408) 200-7820 <%28408%29%20200-7820>*
>
> *FX: (408) 451-9307 <%28408%29%20451-9307>*
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140402/626a736a/attachment.html>


More information about the cisco-voip mailing list