[cisco-voip] VG224 configuration

Thu Apr 3 13:27:54 EDT 2014

Hi Matthew,

Thank you very much for the info and feedback.

Yes, I have used QUINTUM in the past as well but was planning to use CISCO
as the refurbished equipment is cheaper.

But not able to find the right GW for this solution

Regards

Siva

From: Matthew Saskin [mailto:msaskin at gmail.com] 
Sent: Wednesday, April 02, 2014 5:15 PM
To: Tim Smith
Cc: cisco-voip at puck.nether.net; siva at dateksystems.com
Subject: Re: [cisco-voip] VG224 configuration

Not to mention there are probably better (better being subjective of course)
ways to do this. In the past, I've found Quintum boxes a pretty cost
effective way to do analog/tdm to IP bridging at small scale, and Dialogic
at large scale.

On Apr 2, 2014 7:42 PM, "Tim Smith" <tim.smith at enject.com.au> wrote:

Hi,

In theory, you could probably make this work, but I think it would be
considered an unusual application for these boxes.

Their typical application is to provide analog connectivity for endpoints
(i.e. modems, faxes, analog handsets) into a Cisco IPT environment, i.e.
typical CUCM or CME call control.

The ports are FXS so you would need FXO interfaces on your PBX (you have
limited features available here compared to ISDN for example)

You can send and receive calls via SIP to the VG224 (they can also run MGCP,
SCCP and H323)

Normally you would be sending and receiving calls to and from a CUCM for
example

Just search cisco.com and cisco.com support forums and you should find
sample configs. Probably best to have a crack at it first, then post your
findings and any further questions.

If you provide more background, there is likely a better solution. (Just
because we can make something work, doesn't mean we should do it in
production)

In general I would think a typical ISR router 29XX / 39XX would probably be
more suitable (and flexible)

And something like ISDN would be nicer for connecting two systems

Cheers,

Tim

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
Sivakumar Donthamchetty
Sent: Thursday, 3 April 2014 9:50 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VG224 configuration

Hi All,

Wanted to check first of all if I can use VG224 for converting SIP calls to
analog so that I can connect the Analog interface to a PBX.

If so, can some one send me a sample configuration.

Also, does the image file on the GW matters or any image should work?

Regards

Siva

Datek Systems Inc. DBA VoipXchange, Inc.

240 E. Gish Rd.

San Jose, CA. 95112

PH: (408) 200-7820 <tel:%28408%29%20200-7820> 

FX: (408) 451-9307 <tel:%28408%29%20451-9307> 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140403/80245282/attachment.html>