[cisco-voip] update IP Phone firmware

[Heim, Dennis]

Remember if you install the COP file on your publisher, you will need to set the default load back to what it currently is, otherwise all phones will try to pull the new code upon reboot.



Dennis Heim | Solution Architect (Collaboration)
World Wide Technology, Inc. | 314-212-1814

PS Engineering:  Innovate & Ignite.


-----Original Message-----
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff (rratliff)
Sent: Tuesday, April 08, 2014 9:15 AM
To: Reto Gassmann
Cc: cisco-voip voyp list
Subject: Re: [cisco-voip] update IP Phone firmware

The firmware COP files need to be installed on all TFTP servers, or any server that you will potentially want to serve up the firmware via TFTP.

-Ryan

On Apr 8, 2014, at 7:48 AM, Reto Gassmann <voip at mrga.ch> wrote:

Hello Group

we plan the upgrade of our CUCM 8.0 to 9.1.2 this spring.
Now I want to test the new IP Phone firmware on a few phones. I found a cisco document (Upgrade IP Phone Firmware Individually Doc ID: 108090) that describes the steps.
However I have a cluster with 8 CUCM servers.
Do I have to install the IP Phone load upgrade patch file (cmterm-7940-7960-sccp.8-1-2SR2.cop.sgn) on every server or just on the publisher / tftp (are on the same server installed)?

Thanks for help
Regards Reto
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip