[cisco-voip] how to populate a route pattern with a call display / connected name

[Lelio Fulgenzi]

Quite honestly, I have no idea what they look like. :( 

I haven't spent any time collecting logs or traces. I was hoping for a quick comment (such as yours) to point them in the right direction. 

I honestly don't think it's going to be anything special that Cisco needs, just common information any point-to-point connection would need to get that information across. 

More than likely, we're going to be out of luck. Which sucks. 

Lelio 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Network Infrastructure 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

----- Original Message -----

From: "Brian Meade" <bmeade90 at vt.edu> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "Cisco VOIP" <cisco-voip at puck.nether.net> 
Sent: Monday, April 28, 2014 1:42:19 PM 
Subject: Re: [cisco-voip] how to populate a route pattern with a call display / connected name 


Usually going to be the P-Asserted-Identity or the Remote-Party-ID headers that are used for this. They may have privacy enabled or something like that. What does the SIP messaging look like? 


Brian 



On Mon, Apr 28, 2014 at 1:35 PM, Lelio Fulgenzi < lelio at uoguelph.ca > wrote: 





OK, so we've moved our Nuance Speech Attendant solution from a SIP endpoint to a SIP trunk solution. One of the differences we see is now, when people dial our speech attendant, they only see number information, and no name information. I understand that typically (always?) it's the far end that would supply that information back, but I'm wondering if there is a way to force CallManager to display something? 

The Nuance tech I was working with is going to ask about that, but he has never seen any configuration option on their system to push that information back. 

Is there a SIP parameter that I should be asking them to configure or make available? 

Thoughts? 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Network Infrastructure 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140428/0981777a/attachment.html>