[cisco-voip] hardware alarms in CUCM / UCCx / Connection v9 - where to set?

[Brian Meade]

There's also some MIBs you can watch via SNMP.  And I'm guessing the
failure didn't trigger a "Hardware Failure" alert in RTMT?

Here's a doc with some details-
http://docwiki.cisco.com/wiki/Monitoring_and_Maintaining_CUCM_Appliance_Hardware


On Tue, Aug 26, 2014 at 3:07 PM, Brian Meade <bmeade90 at vt.edu> wrote:

> Yea, unfortunately setting the remote syslog config process sucks.  I work
> in an managed services environment so have to go through and do those for
> every new client.
>
>
> On Tue, Aug 26, 2014 at 3:01 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>
>> Yes, still physical servers. I'll check out RTMT and syslog and/or remote
>> syslog.
>>
>> Just wondering what all the alarm configuration/definition options are
>> for in both CUCM and UCCx serviceability pages. It seems like you have to
>> select 20 or so different options in order to configure everything with a
>> remote syslog. Would be nice to be able to do this in one spot.
>>
>>
>> Lelio
>>
>>
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst, Network Infrastructure
>> Computing and Communications Services (CCS)
>> University of Guelph
>>
>> 519‐824‐4120 Ext 56354
>> lelio at uoguelph.ca
>> www.uoguelph.ca/ccs
>> Room 037, Animal Science and Nutrition Building
>> Guelph, Ontario, N1G 2W1
>>
>> ------------------------------
>> *From: *"Brian Meade" <bmeade90 at vt.edu>
>> *To: *"Lelio Fulgenzi" <lelio at uoguelph.ca>
>> *Cc: *"cisco-voip (cisco-voip at puck.nether.net)" <
>> cisco-voip at puck.nether.net>
>> *Sent: *Tuesday, August 26, 2014 2:50:40 PM
>> *Subject: *Re: [cisco-voip] hardware alarms in CUCM / UCCx / Connection
>> v9 - where to set?
>>
>>
>> You're on physical servers, right Lelio?
>>
>> I would check the syslogs using the syslog viewer in RTMT and see if
>> anything is in there showing the failure.  If so, you can set up remote
>> syslog.
>>
>> Brian
>>
>>
>> On Tue, Aug 26, 2014 at 2:44 PM, Lelio Fulgenzi <lelio at uoguelph.ca>
>> wrote:
>>
>>>
>>> We've had a couple of hard drives go and we've only noticed because we
>>> saw an amber light when we've walked by. Where do I set this type of alarm
>>> up? We're getting application alarms but not these.
>>>
>>> Is there a log I can download to see when the drive went bad?
>>>
>>> We're live with CUCM and UCCx v9 now. So those are the answers I'm
>>> looking for short term.
>>>
>>> Lelio
>>>
>>>
>>> ---
>>> Lelio Fulgenzi, B.A.
>>> Senior Analyst, Network Infrastructure
>>> Computing and Communications Services (CCS)
>>> University of Guelph
>>>
>>> 519‐824‐4120 Ext 56354
>>> lelio at uoguelph.ca
>>> www.uoguelph.ca/ccs
>>> Room 037, Animal Science and Nutrition Building
>>> Guelph, Ontario, N1G 2W1
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140826/3c4428c5/attachment.html>