[cisco-voip] NFAS t1

[Brian Meade]

Is the pri-group already configured on that controller?  If so, you'll need
to shut down the voice-port, the serial interface, and then do "no
pri-group" on the controller before re-defining the pri-group configuration.

On Mon, Dec 1, 2014 at 5:37 PM, Charles Goldsmith <wokka at justfamily.org>
wrote:

> We are seeing an odd error on a migration from a Nortel setup over to an
> h323 setup.
>
> the error message after entering PRI 2 is
>
> *crsvr1(config-controller)#pri-group timeslots 1-24 nfas_ backup nfas_int
> 1 nfas_group 1*
>
> *%The Primary-group is already defined*
> *%The first definition of the primary-group must be removed before the
> primary-group can be redefined*
>
> Getting this after putting the timeslots command on the first pri, then
> seeing this error on the 2nd controller.
>
> This is on 15.2 on a 3945.  I've done this before with no issues, but have
> never seen this error before.
>
> Thanks
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141201/9a872a2c/attachment.html>