[cisco-voip] Replace 7940 with 7942

[Ryan Huff]

Add a new phone device using the 7942 device type. Then build out the device config line for line compared with the 7940 config. Pay attention the phone template/softkey templates ... etc.

Thanks,

Ryan Huff
ryanthomashuff.com
CCNA R/S, CCNA Wireless, CCNP Voice, UCCX Specialist


Date: Wed, 17 Dec 2014 09:10:56 -0500
From: dzhars at gmail.com
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Replace 7940 with 7942

I have a two line 7940 setup but the internal mic is not working.  SO i bought a 7942 replacement.  If I were doing a 7940 for 7940 replacement, I would just login to CM to do a MAC Address change.  What is the best/easiest way to do this since I am replacing it with a 7942?

Thanks.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141217/2a9cd1df/attachment.html>