[cisco-voip] UC on UCS storage.....

[Walenta, Philip]

In my VM lab I'm running iSCSI against a 4GB connected NetApp NAS.  With about 80 other machines running on the same NAS upgraded from 8.6 to 9.1 in about 30 minutes with a ~250 device database.  I could have gone with a 10gb connection but didn't like the price.

Sent from my iPhone

On Dec 17, 2014, at 6:17 PM, Scott Voll <svoll.voip at gmail.com<mailto:svoll.voip at gmail.com>> wrote:

I just found this:  http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#Storage

Looks like all the protocols are supported.  FCoE, iSCSI, NFS for 3rd party.

Anyone running any of this in production and care to put in your two cents?

Scott

On Wed, Dec 17, 2014 at 2:55 PM, Scott Voll <svoll.voip at gmail.com<mailto:svoll.voip at gmail.com>> wrote:
OK planning storage requirements for UC on UCS upgrade from 8.6(physical)  to 10.5(vm)

we are looking at 2 CM nodes, 1 UC, 1 UCCx, one CER, PLM, PCD, and presence.  The way I see it from the VM doc's it looks like I need about 1 TB of storage and roughly 8k IOPS.  What Protocols are supported?  FCoE? iSCSI? NFS?  The only thing I have found thus far is FC.

Can anyone confirm that IO and Storage looks reasonable?  and let me know which protocol's are TAC supported?

Thanks

Scott

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141217/772fba34/attachment.html>