[cisco-voip] Basic Jabber Deploy question

[Josh Warcop]

UDS runs on each node so for redundancy put in SRV records weighted or balanced.

https://supportforums.cisco.com/document/12228191/jabber-service-discovery-using-user-data-service-uds-faq-live-webcast



Sent from my Windows Phone
________________________________
From: Ed Leatherman<mailto:ealeatherman at gmail.com>
Sent: ‎12/‎31/‎2014 3:15 PM
To: Cisco VOIP<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] Basic Jabber Deploy question

Hello,

I'm working on a project to deploy jabber in a limited roll-out as
phone-only mode for a specific application. I'm interested in using srv
records as it looks like it might be easier for end-user/students to sign
into the client, so my question is related to that. I see that the
_cisco-uds record is used for the client to find call manager; does this
srv need to point to the publisher node, TFTP node, or CM node(s)? If not
the TFTP node, how does the client know where pull it's configuration from
once it has authenticated?

I have jabber working OK manually just by configuring the client - I'm just
looking for ease-of-use here for the students and staff that will be using
it.

Thanks for any clarification, most of the documents are centered around
IM&P which isn't what i'm after right now.

Happy New Year!

--
Ed Leatherman
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141231/bde551db/attachment.html>
-------------- next part --------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip