[cisco-voip] Transcoding on a CME for a CUE

Buchanan, James jbuchanan at presidio.com
Fri Feb 7 13:06:05 EST 2014


Bear in mind that the default codec is g729br8, not g729r8 (which is probably what your carrier is using). You really need to specify a codec.

James Buchanan | Sr. Network Engineer
Presidio | www.presidio.com
12 Cadillac Drive Suite 130, Brentwood, TN 37027
D: 615.866.5729 | C: 931.797.2326 | F: 615.866.5781 | jbuchanan at presidio.com



PRESIDIO
Practical thinking for a connected world.


Follow Us: www.twitter.com/presidio




________________________________________
From: cisco-voip [cisco-voip-bounces at puck.nether.net] on behalf of Zoltan.Kelemen at Emerson.com [Zoltan.Kelemen at Emerson.com]
Sent: Friday, February 07, 2014 8:27 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Transcoding on a CME for a CUE

Hi,

Incoming codec is g.729. It does not show up in the config since that is the default setting on a dial-peer.

I'm well aware, that the two codecs differ, I have no choice (WAN is strictly g729, CUE is g711 only). That is why I have transcoding set up, see my original email in the thread.
I'm also aware that the call fails, because of codec mismatch.

My problem is why? Why does the configured transcoding NOT work as expected?
This will probably end up a TAC case early next week as I'm traveling right now, just wanted to get some opinions if I was doing anything obviously wrong and if I've missed something.

Zoltan Kelemen
Global Communications and Information Security
Implementation Engineering
Emerson

-----Original Message-----
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Andreas Sikkema
Sent: Friday, February 07, 2014 3:24 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Transcoding on a CME for a CUE

Zoltan,

> The attached trace should have those debugs and more.
>
>
>
> Caller: +13***531042
> Called: +19***465067
>
> Forwarded to voicemail extension: 5110

Zoltan, the incoming call is G.729 only and all dialpeers in your config appear to be G.711 only.


--
Andreas Sikkema
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
This message w/attachments (message) is intended solely for the use of the intended recipient(s) and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete and destroy all copies and attachments. Please be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited.



More information about the cisco-voip mailing list