[cisco-voip] dial into ddi and get a secondary dial tone to call a new number

abbas Wali abbaseo at gmail.com
Tue Feb 11 06:01:20 EST 2014


TCL scripts on MGCP gateway ??


On 11 February 2014 10:40, Matthew Collins <mcollins at block.co.uk> wrote:

> This can also be set up as part of Single number reach using Mobile Voice
> Access, You need to install a TCL script on the router. Users dial in,
> Prompted for extension number and pin then get secondary dial tone to dial
> out.
>
> Regards
>
> Matthew
>
> -----Original Message-----
> From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
> Buchanan, James
> Sent: 11 February 2014 10:21
> To: abbas Wali; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] dial into ddi and get a secondary dial tone to
> call a new number
>
> Not really. Some have done this using call handlers with pre-programmed
> speed dials. Some have also tried changing the restriction tables in Unity
> to allow for this, but that has a tone of security issues. UCCX would be
> your best place to do this, but you would want to make sure you secured it
> with a PIN.
>
> James Buchanan | Sr. Network Engineer
> Presidio | www.presidio.com
> 12 Cadillac Drive Suite 130, Brentwood, TN 37027
> D: 615.866.5729 | C: 931.797.2326 | F: 615.866.5781 |
> jbuchanan at presidio.com
>
>
>
> PRESIDIO
> Practical thinking for a connected world.
>
>
> Follow Us: www.twitter.com/presidio
>
>
>
>
> ________________________________________
> From: cisco-voip [cisco-voip-bounces at puck.nether.net] on behalf of abbas
> Wali [abbaseo at gmail.com]
> Sent: Tuesday, February 11, 2014 4:11 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] dial into ddi and get a secondary dial tone to call
> a     new number
>
> hi all,
>
> is there a feature in CUCM 8.5 where you call into a tollfree number into
> cucm cluster and then from there you call out to different destinations
> i.e. getting a secondary dialtone after the first call connects
>
> Thanks
>
>
> --
>
> This message w/attachments (message) is intended solely for the use of the
> intended recipient(s) and may contain information that is privileged,
> confidential or proprietary. If you are not an intended recipient, please
> notify the sender, and then please delete and destroy all copies and
> attachments. Please be advised that any review or dissemination of, or the
> taking of any action in reliance on, the information contained in or
> attached to this message is prohibited.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
*Abbas Wali*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140211/bb15766a/attachment.html>


More information about the cisco-voip mailing list