[cisco-voip] dial into ddi and get a secondary dial tone to call a new number

[Matthew Collins]

Hi Abbas,

Bit long winded but yes it can be done, Create another loopback address on the gateway, Set up a h323 router in CUCM using the new loopback address and send that specific dial in number down to the H323 router. The TLC scrit can then pick up the call and route accordingly.  You will also need to create a dial peer to send the public call back to the CUCM to then be routed out MGCP.

Regards

Matthew

ǀ BLOCK ǀ
Cisco Global EMEAR Partner of the Year 2013

From: abbas Wali [mailto:abbaseo at gmail.com]
Sent: 11 February 2014 11:01
To: Matthew Collins
Cc: Buchanan, James; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] dial into ddi and get a secondary dial tone to call a new number

TCL scripts on MGCP gateway ??

On 11 February 2014 10:40, Matthew Collins <mcollins at block.co.uk<mailto:mcollins at block.co.uk>> wrote:
This can also be set up as part of Single number reach using Mobile Voice Access, You need to install a TCL script on the router. Users dial in, Prompted for extension number and pin then get secondary dial tone to dial out.

Regards

Matthew

-----Original Message-----
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>] On Behalf Of Buchanan, James
Sent: 11 February 2014 10:21
To: abbas Wali; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] dial into ddi and get a secondary dial tone to call a new number

Not really. Some have done this using call handlers with pre-programmed speed dials. Some have also tried changing the restriction tables in Unity to allow for this, but that has a tone of security issues. UCCX would be your best place to do this, but you would want to make sure you secured it with a PIN.

James Buchanan | Sr. Network Engineer
Presidio | www.presidio.com<http://www.presidio.com>
12 Cadillac Drive Suite 130, Brentwood, TN 37027
D: 615.866.5729 | C: 931.797.2326 | F: 615.866.5781 | jbuchanan at presidio.com<mailto:jbuchanan at presidio.com>



PRESIDIO
Practical thinking for a connected world.


Follow Us: www.twitter.com/presidio<http://www.twitter.com/presidio>




________________________________________
From: cisco-voip [cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>] on behalf of abbas Wali [abbaseo at gmail.com<mailto:abbaseo at gmail.com>]
Sent: Tuesday, February 11, 2014 4:11 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] dial into ddi and get a secondary dial tone to call a     new number

hi all,

is there a feature in CUCM 8.5 where you call into a tollfree number into cucm cluster and then from there you call out to different destinations i.e. getting a secondary dialtone after the first call connects

Thanks


--

This message w/attachments (message) is intended solely for the use of the intended recipient(s) and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete and destroy all copies and attachments. Please be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip



--
Abbas Wali
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140211/aa6fd7e7/attachment.html>