[cisco-voip] Upgrades prohibited... sigh

Tue Feb 11 19:13:14 EST 2014

I have a similar upgrade coming up next week.. 7.1.5 to 9.1.2 MCS to B200
M3 blades. Only question I really have is... are there any potential issues
with just restoring the PUB and rebuilding the SUB from scratch, other than
TFTP files etc? We're having to do it in production without an official
maintenance window because it's a hospital with allot of moving parts.

The idea is to take down the PUB, build the PUB on the same IP, restore
just the PUB and then upgrade.
Failover to the new PUB and rebuild the Sub from scratch, move over the MOH
files etc.
Thoughts one that?

BTW.. thanks for updating on your progress Lelio, very helpful in seeing
the gotcha I've not hit previously.

On Tue, Feb 11, 2014 at 4:59 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

>
> lol. thanks Matthew.
>
> I think I'm going to have to engage our partner for an official answer
> this week, while I try out some scenarios. Bottom line is, if Cisco isn't
> going to officially support this or help out, then I have to go to
> management and let them know, and they can raise the roof. ;) It would be
> nice to at least get a "no, sorry, the COP refresh file does not properly
> disable upgrade restrictions on MCS hardware" - or something like that.
>
> I can't believe I'm the only one out here that doesn't have the money to
> go to VM just yet, and has enough hardware to do an off-line install with
> supported hardware. I guess if the supported way to is to get licenses
> rehosted, than I'm OK with that, as long as our partner will support us
> when the requests go to licensing.
>
> Interestingly enough, I was reading the main page (
> https://supportforums.cisco.com/docs/DOC-35163) and found the following
> bug listed there (https://tools.cisco.com/bugsearch/bug/CSCtb86875) which
> states that I need install the license after the DRS restore. So this would
> make the correct order:
>
>    1. install v7
>    2. install COP/refresh
>    3. do DRS
>    4. reboot servers
>    5. perform dbreplicate fixes if required
>    6. upload license
>    7. perform upgrades
>
>
> We'll have to see how my next test goes.
>
> Funny thing is, the license reporting page shows no problem with the
> licenses. Weird.
>
> Oh well, tomorrow's another day.
>
>
>
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst, Network Infrastructure
> Computing and Communications Services (CCS)
> University of Guelph
>
> 519‐824‐4120 Ext 56354
> lelio at uoguelph.ca
> www.uoguelph.ca/ccs
> Room 037, Animal Science and Nutrition Building
> Guelph, Ontario, N1G 2W1
>
> ------------------------------
> *From: *"Matthew Loraditch" <MLoraditch at heliontechnologies.com>
> *To: *"Lelio Fulgenzi" <lelio at uoguelph.ca>
> *Cc: *"cisco-voip" <cisco-voip at puck.nether.net>
> *Sent: *Tuesday, February 11, 2014 4:37:50 PM
>
> *Subject: *RE: [cisco-voip] Upgrades prohibited... *sigh*
>
>  Yes you are technically correct about the refresh file. The original
> version was designed to allow the OS upgrades that happened with <8.6 to
> 8.6+. They then added the removal of the license check with v1.2 and 1.3 of
> the refresh solely for the Jump upgrade. So yes you will need the refresh
> file to install 9.1.2 but you won’t have to deal with the licensing crud if
> you rehost.
>
>
>
> The jump upgrade is the recommended path because VMWare is the recommended
> path what you are doing is what every cisco partner, TAC and sales employee
> doesn’t want you  to do, but technically still supports.  We all still love
> you Lelio, but I know the PM in charge of the OS stuff and he’d cringe
> knowing you were doing this :)
>
>
>
> I would install your licenses before the refresh file but I’d guess it
> won’t matter.
>
>
>
> [image: cid:image001.jpg at 01C95158.4441E1B0]
>
> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
>
> 1965 Greenspring Drive
> Timonium, MD 21093
>
> direct voice. 443.541.1518
> fax.  410.252.9284
>
> Twitter <http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>
> | Website <http://www.heliontechnologies.com/>  |  Email Support<support at heliontechnologies.com?subject=Technical%20Support%20Request>
>
> Support Phone. 410.252.8830
>
> [image: cid:image002.png at 01CF2745.9EFA8A80]
>
>
>
> *From:* Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
> *Sent:* Tuesday, February 11, 2014 4:17 PM
> *To:* Matthew Loraditch
> *Cc:* cisco-voip
> *Subject:* Re: [cisco-voip] Upgrades prohibited... *sigh*
>
>
>
>
> Hi Matthew, re-hosting licenses is definitely an option. I wanted to make
> sure that this path _didn't_ work first, because it is the
> recommended/advertised approach.
>
> I'm lucky in that I already have the licenses for my test cluster which
> match this isolated publisher MAC, since they were issued on this isolated
> pub first, and I rehosted to another one due to some issues.
>
> For my production cluster, it means rehosting to the isolated pub MAC and
> going forward.
>
> Your comment regarding "the only reason you need the refresh file is
> because 6.1 and 7.1 can’t read licenses when running on VMWare" is
> interesting because according to the readme file, it's for more than that.
> In fact, it doesn't mention licensing at all.
>
> The refresh upgrade COP file delivers changes to the user experience on
> the CLI and GUI that are related to a refresh upgrade, and basic
> functionality needed to support refresh upgrades. Refresh upgrade is a new
> feature in 8.6(x) that allows upgrades between incompatible OS versions.
>
> The question then becomes, at what point do I install the license files,
> before or after the COP_refresh file?
>
> Lelio
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst, Network Infrastructure
> Computing and Communications Services (CCS)
> University of Guelph
>
> 519‐824‐4120 Ext 56354
> lelio at uoguelph.ca
> www.uoguelph.ca/ccs
> Room 037, Animal Science and Nutrition Building
> Guelph, Ontario, N1G 2W1
>
>
>  ------------------------------
>
> *From: *"Matthew Loraditch" <MLoraditch at heliontechnologies.com>
> *To: *"Lelio Fulgenzi" <lelio at uoguelph.ca>, "cisco-voip" <
> cisco-voip at puck.nether.net>
> *Sent: *Tuesday, February 11, 2014 3:42:06 PM
> *Subject: *RE: [cisco-voip] Upgrades prohibited... *sigh*
>
> Just being devil’s advocate but since you aren’t going to VM, why don’t
> you just rehost the license files. It seems like you may have spent more
> time trying to JUMP when the only reason you need the refresh file is
> because 6.1 and 7.1 can’t read licenses when running on VMWare. You can do
> that once and since it’s hardware the MAC isn’t going to change no matter
> how many times you have to run through the install. Seems easier to open
> that case once and wait a few hours for rehosted licenses.
>
>
>
> [image: cid:image001.jpg at 01C95158.4441E1B0]
>
> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
>
> 1965 Greenspring Drive
> Timonium, MD 21093
>
> direct voice. 443.541.1518
> fax.  410.252.9284
>
> Twitter <http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>
> | Website <http://www.heliontechnologies.com/>  |  Email Support<support at heliontechnologies.com?subject=Technical%20Support%20Request>
>
> Support Phone. 410.252.8830
>
> [image: cid:image002.png at 01CF273F.417B0D40]
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net<cisco-voip-bounces at puck.nether.net>]
> *On Behalf Of *Lelio Fulgenzi
> *Sent:* Tuesday, February 11, 2014 3:34 PM
> *To:* cisco-voip
> *Subject:* [cisco-voip] Upgrades prohibited... *sigh*
>
>
>
>
> OK, so, I've attempted the upgrade from v7.1(5b)SU3 to v9.1(2)SU1 and I've
> got the dreaded "upgrades prohibited during license grace period" error.
> *big sigh*
>
> I'm using this as a resource:
>
>
> https://supportforums.cisco.com/servlet/JiveServlet/download/35163-6-15369435/Drive_to_Nine_Jump_upgrade_versions_4.1.3-7.1.5_to_9.1.2-3%5B1%5D.pdf
>
> Some comments:
>
>    - I am not recreating my cluster on VM ware, I am using supported MCS
>    servers
>    - I installed 7.1(5b)SU3 via a "install with patch" process, using
>    7.1(3a) media
>    - I installed the the v1.3 COP refresh file next and did NOT reboot
>    the cluster
>    - I performed a DRS restore and recovered first the publisher, then
>    the subscriber
>    - I rebooted the subscriber first, then the publisher
>    - Performed dbreplication recovery (with an unfortunate reboot in the
>    middle)
>
> I guess the biggest question is whether or not the COP refresh files
> disables the licenses restrictions on MCS servers or not. Or whether I
> should attempt this again, or call the TAC for them to allow upgrades via
> root.
>
>
>
> I'm on an isolated network, so it means some fancy routing on a laptop if
> the TAC is necessary.
>
>
>
> Suggestions?
>
>
>
> Lelio
>
>
>
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst, Network Infrastructure
> Computing and Communications Services (CCS)
> University of Guelph
>
> 519‐824‐4120 Ext 56354
> lelio at uoguelph.ca
> www.uoguelph.ca/ccs
> Room 037, Animal Science and Nutrition Building
> Guelph, Ontario, N1G 2W1
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140211/691ea5bc/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 10887 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140211/691ea5bc/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 33011 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140211/691ea5bc/attachment.jpg>