[cisco-voip] Outbound MGCP/FXO calls through PSTN to CME fail

Buchanan, James jbuchanan at presidio.com
Sun Feb 16 14:14:08 EST 2014


Hello,

Can you send us some router configs?

Thanks,

James

James Buchanan | Sr. Network Engineer
Presidio | www.presidio.com
12 Cadillac Drive Suite 130, Brentwood, TN 37027
D: 615.866.5729 | C: 931.797.2326 | F: 615.866.5781 | jbuchanan at presidio.com



PRESIDIO
Practical thinking for a connected world.


Follow Us: www.twitter.com/presidio




________________________________________
From: cisco-voip [cisco-voip-bounces at puck.nether.net] on behalf of Jeffrey Girard [jeffrey.girard at girardinc.com]
Sent: Sunday, February 16, 2014 11:25 AM
To: cisco-voip voyp list
Subject: [cisco-voip] Outbound MGCP/FXO calls through PSTN to CME fail

Lab environment

Setup

7960 -> CUCM 8.6 -> MGCP controlled FXO port on 2811 router -> PSTN emulator (another 2811) -> E1 trunk -> Public Router (CME) -. 7960

FXO port is set up to PLAR to the 4 digit extension on the CUCM hosted 7960.

Calls from the "public" IP phone into the FXO port work fine (they PLAR to the correct extension, the extension rings, call completes)

Calls outbound from the 7960 attached to the CUCM, fail.

I have tried both loopstart and ground start between the FXO and the FXS ports.

Running a debug voice ccapi inout on my PSTN emulator shows no activty during the call - indicating to me that the call never makes it to the PSTN.

Running a debug voice ccapi inout on my MGCP gateway shows a call disconnect cofe of 47.  I know that this indicates a resource issue.

If I execute a voice port summary on my MGCP gateway durig the call, the voice port goes offhook, but doing the same on the PSTN emulator shows that the corresponding FXS voice port never goes offhook.

As this is a lab setup and Im using it to learn from, I can make any changes needed and capture debugs as desired

Jeff

This message w/attachments (message) is intended solely for the use of the intended recipient(s) and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete and destroy all copies and attachments. Please be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited.



More information about the cisco-voip mailing list