[cisco-voip] PVDM3 is it based on C5510?
Tommy Schlotterer
tschlotterer at netechcorp.com
Thu Feb 27 19:54:54 EST 2014
If you physically look at the PVDM card you can see a large LSI Chip on it. A little searching and I found the following datasheet pertaining to LSI’s DSP’s.
Tommy
Tommy Schlotterer | Systems Engineer
CCNA, CCNA Voice
[cid:image001.png at 01CF33F5.C86DB1F0]
48325 Alpha Dr. Ste. 150
Wixom, MI 48393
p 248.468.0710
e tschlotterer at netechcorp.com<mailto:tschlotterer at netechcorp.com>
w netechcorp.com<http://netechcorp.com/>
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (AM)
Sent: Thursday, February 27, 2014 7:43 PM
To: Nick Matthews; Lelio Fulgenzi
Cc: cisco-voip (cisco-voip at puck.nether.net)
Subject: Re: [cisco-voip] PVDM3 is it based on C5510?
Best I can tell the Manufacturer is a secret. I did some sleuthing and found out it’s Hayward Pool Parts. DSP seems to be a modification from their SP2600 Pool Pump.
http://www.poolpartsonline.com/p-31-hayward-super-pump-sp2600-series-parts-hayward-pool-parts.aspx
☺ If you believe this I have some oceanfront property in Arizona for sale, I make you good deal.
From: matthn at gmail.com<mailto:matthn at gmail.com> [mailto:matthn at gmail.com] On Behalf Of Nick Matthews
Sent: Thursday, February 27, 2014 5:20 PM
To: Lelio Fulgenzi
Cc: Jason Aarons (AM); cisco-voip (cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>)
Subject: Re: [cisco-voip] PVDM3 is it based on C5510?
The PVDM3 is a totally different chipset and manufacturer. There are no shared bugs - only shared problems that may be re-solved on another architecture.
-nick
On Thu, Feb 27, 2014 at 12:28 PM, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:
does this help?
________________________________
router#show inventory
NAME: "CISCO3945-CHASSIS", DESCR: "CISCO3945-CHASSIS"
<snip>
NAME: "PVDM3 DSP DIMM with 256 Channels on Slot 0 SubSlot 4", DESCR: "PVDM3 DSP DIMM with 256 Channels"
PID: PVDM3-256 , VID: V01 , SN: FOC16146REK
<snip>
________________________________
router#show voice dsp capabilities slot 0 dsp 4
DSP Type: SP2600 -43
Card 0 DSP id 4 Capabilities:
Credits 645 , G711Credits 15, HC Credits 32, MC Credits 20,
FC Channel 43, HC Channel 20, MC Channel 32,
Conference 8-party credits:
G711 40 , G729 92 , G722 92 , ILBC 129
Secure Credits:
Sec LC Xcode 20, Sec HC Xcode 35,
Sec MC Xcode 26, Sec LC UNIV Xcode 20,
Sec HC UNIV Xcode 64,Sec MC UNIV Xcode 35,
Sec G729 conf 129, Sec G722 conf 129, Sec ILBC conf 161,
Sec G711 conf 71 ,
Max Conference Parties per DSP:
G711 128, G729 56, G722 56, ILBC 40,
Sec G711 72, Sec G729 40,
Sec G722 40 Sec ILBC 32,
Voice Channels:
g711perdsp = 43, g726perdsp = 32, g729perdsp = 20, g729aperdsp = 32,
g723perdsp = 0 , g728perdsp = 20, g711_5msperdsp = 28, gsmamrnbperdsp = 20,
ilbcperdsp = 20, isacperdsp = 10, modemrelayperdsp = 20,
g72264Perdsp = 32, h324perdsp = 20,
m_f_thruperdsp = 43, faxrelayperdsp = 32,
maxchperdsp = 43, minchperdsp = 20,
srtp_maxchperdsp = 27, srtp_minchperdsp = 14, faxrelay_srtp_perdsp = 14,
g711_srtp_perdsp = 27, g729_srtp_perdsp = 14, g729a_srtp_perdsp = 24
gnx64_srtp_perdsp = 27
________________________________
---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS)
University of Guelph
519‐824‐4120 Ext 56354<tel:519%E2%80%90824%E2%80%904120%20Ext%2056354>
lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>
www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs>
Room 037, Animal Science and Nutrition Building
Guelph, Ontario, N1G 2W1
________________________________
From: "Jason Aarons (AM)" <jason.aarons at dimensiondata.com<mailto:jason.aarons at dimensiondata.com>>
To: "cisco-voip (cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>)" <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Sent: Thursday, February 27, 2014 9:01:50 AM
Subject: [cisco-voip] PVDM3 is it based on C5510?
PVDM3 is it a C5510 chipset?
Does it a have a TI chipset nomenclature?
I don’t have access to a x9xx to show voice dsp right now.
This doesn’t really say.
http://www.cisco.com/c/en/us/td/docs/routers/access/1900/software/configuration/guide/Software_Configuration/pvdm3_config.pdf
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140227/e150bb19/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 12680 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140227/e150bb19/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: LSI_PB_2pg_SP2704c_LR.pdf
Type: application/pdf
Size: 170284 bytes
Desc: LSI_PB_2pg_SP2704c_LR.pdf
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140227/e150bb19/attachment.pdf>
More information about the cisco-voip
mailing list