[cisco-voip] SRST 9.1 and 6961 with latest firmware

[Anthony Kouloglou]

Brian,
i cannot see anything suspicious at the log.
I am using dns name for ccms and it is sure that when the wan is out, 
dns is not accessible.
Could this be the reason?

BR
Anthony

Στις 2/1/2014 5:13 μμ, ο/η Brian Meade (brmeade) έγραψε:
>
> Anthony,
>
> Take a look at the console logs to see if anything is causing a delay.
>
> The SRST option will never display any sort of status indication as 
> the phone doesn’t maintain a backup registration with the SRST 
> router.  It just fails over to that option if all the CM’s are down.
>
> Brian
>
> *From:*Anthony Kouloglou [mailto:akoul at dataways.gr]
> *Sent:* Thursday, January 02, 2014 10:05 AM
> *To:* Brian Meade (brmeade); cisco-voip at puck-nether.net
> *Subject:* Re: [cisco-voip] SRST 9.1 and 6961 with latest firmware
>
> Well,
> i have upgraded to 9.4.1.3 and it worked!
> But i have to wait almost 2 and a half minutes! I thought with the 
> default settings for keepelives, in 90 seconds it should register!
> I have never waited more than 2 minutes...
> Sorry for that :-[
> At the web page though, the 3rd option (srst) displays only the IP of 
> the srst with no indication if it is ok or not.
>
> BR
> Anthony
>
> Στις 2/1/2014 3:32 μμ, ο/η Anthony Kouloglou έγραψε:
>
>     Hi Brian,
>     i have dowloaded the xml file for the 9.1.1sr1 phoneload.
>     There it is clearly stated the name of the SRST and it's IP address.
>     The srst does not show on the phone's web page but it gets
>     registered to it when there is a WAN outage.
>     I will upgrade and see the xml file and the packet/console logs
>     for 9.4.1.
>     Just one last question: must the srst be shown as srst in
>     parenthesis () when everything is ok?
>     for example, primary and secondary ccms are always shown as
>     (active) and (standby).
>
>     BR
>     Anthony
>
>     Anthony,
>
>         The phone console logs and a packet capture on the phone side
>         will probably help with determining why the phone isn’t
>         registering with the SRST router.
>
>         On the old firmware, there was a bug where the SRST address
>         didn’t properly show up.  Having trouble finding it though.
>
>         Brian
>
>         *From:*cisco-voip [mailto:cisco-voip-bounces at puck.nether.net]
>         *On Behalf Of *Anthony Kouloglou
>         *Sent:* Wednesday, January 01, 2014 11:26 AM
>         *To:* cisco-voip at puck-nether.net
>         <mailto:cisco-voip at puck-nether.net>
>         *Subject:* [cisco-voip] SRST 9.1 and 6961 with latest firmware
>
>         Hi all,
>         i wish you a happy new year!
>         I have an 6961, running the latest 9.4.1 firmware which
>         registers on CUCM 9.1.
>         It is at a remote site which has an 881v where
>         call-manager-fallback is configured (SRST 9.1)
>         Although it gets the srst as a third option after the
>         Publisher and subscriber, when the wan connection to the main
>         site is off, it does not even try to get registered! (i have
>         debugged ephone registration)
>         I have downgraded to 9.3 and 9.2 and still nothing.
>         Finally, when i downgraded to 9.1.1sr1 it started to get
>         register to the SRST.
>         Funny thing is that web page of the phone does not report the
>         srst after the 2 ccms!
>         Any ideas would be appreciated!
>
>         BR
>         Anthony
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140102/a87d0202/attachment.html>